|
|
|
|
|
|
Redline Tuning Hood Struts 99-04 Mustang
|
Our Price: $70.88
|
|
|
Replace the stock hood prop rod today with the hood QuickLIFT system from Redline Tuning. There are always areas that the OEM doesn't address due to cost - our inexpensive hood QuickLIFT system is one of them... Whether you have the V-6 or V-8, you'll love the additional engine bay access you will gain with our QuickLIFT system installed. Made from the highest quality components, including: custom black e-coated gas springs on the QuickLIFT PLUS (or ELITE series 316L stainless steel gas springs). Our design is very easy to install and gets nothing but the highest marks from our customers and magazine reviews.
The QuickLIFT moves the hood lift pivots close to the hinge, freeing up valuable access to the engine bay and keeping you from the painful falling hood when you accidentally bump the prop rod from it's mount! Modify your vehicle today and throw away your prop rod for good.
QuickLIFT includes:
(2) Gas-springs
(Black e-coated for QuickLIFT PLUS, 316L Stainless steel on the QuickLIFT ELITE system)
(2) Ball-stud brackets (Black powder-coated on PLUS & Elite)
(2) Fender ball-studs, washers and lock-nuts - all specially coated black for an impenetrable long lasting finish
(4) High-strength multi-grip rivets (coated black on PLUS/ELITE systems using anaerobic urethane)
(2) Locking clips
Full Color Printed Manual
QuickLIFT PLUS - the latest release, a cross between the base kit and our QuickLIFT ELITE. All black components, including: the QuickLIFT black e-coated gas springs, black shafts, ball-stud end fittings & black powder-coated brackets (from the ELITE system) along with the best anaerobic-coated-urethane mounting hardware.
QuickLIFT ELITE - For those who want the best money can buy - QuickLIFT ELITE. Includes the ultimate 316L Stainless Steel gas springs, black powder-coated brackets. QuickLIFT ELITE install shown in most of the product photos.
|
|
|
|
|
|
|
|
|
|
TruFiber Mach 2 Fiberglass Hood 94-98 Mustang
|
List Price: $399.88
Our Price: $329.88
You save $70.00!
|
|
|
Mustang Fiberglass Hood: 1994-1998 Mach 2
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
TruFiber Cobra R 2000 Hood w/ Closed Vents 94-98 Mustang
|
|
Our Price: $359.88
|
|
|
Mustang Fiberglass Hood: 1994-1998 Cobra R 2000 (Closed Vents)
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends 1.5" Cowl Induction Hood 96-98 Mustang
|
|
Our Price: $389.88
|
|
|
The 1 1/2 inch hood cowl induction scoop rises quickly to give you needed under hood clearance. Originally designed by H.O. Fibertrends. Manufactured by HO to be used on 1995 Cobra R Mustang.The perimeter hood design gives exceptional strength and keeps the weight down to approx. 21 Lbs. Comes with a metal latch just like your factory hood.
All our hoods come with hinge and latch mounting points ready to use.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends 2.5" Cowl Induction Hood 96-98 Mustang
|
|
Our Price: $389.88
|
|
|
The 2 1/2 inch hood cowl induction scoop rises quickly to give you needed under hood clearance. The cowl is fully functional allowing hot air to exit at low speeds and cool air to enter at higher speeds.
The perimeter hood design gives exceptional strength and keeps the weight down to approx. 21 Lbs.
Comes with a metal latch just like your factory hood.
All our hoods come with hinge and latch mounting points ready to use.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends 3.5" Cowl Induction Hood 96-98 Mustang
|
|
Our Price: $389.88
|
|
|
The Big Brother of the Cobra R hood. Designed to be lethal in the eyes of your competition. With basically the same looks as the hood used on the 1995 Cobra R Mustangs . The cowls scoop starts rising near the fender and continues to raise a second level to 3 ½ inches taller than your stock mustang hood.
The 3 ½ inch cowl induction hood fits 1994-1998 Mustangs.
Only 24 lbs. Made from high quality hand laid fiberglass. Our hoods are made with a tough white gel-coat surface, that resists fiber strand print through. We only use the very highest quality surface coats, better than the general purpose gel-coats that’s used by most of our competitors.
Our Fiberglass hoods are engineered for strength and reliability. Instead of the cheap inserts placed into the fiberglass, which can be ripped out the hinge and latch. areas. H.O. Fibertrends takes the time to laminate blocks of aircraft quality aluminum into the fiberglass under structure. The hinge areas come predrilled and threaded. The latch is all metal just like your factory hood. So when the hood arrives its ready to be installed.
After our hoods come out of their molds, we remove the flashing and finish the edges for you. Filling the gapes left by bonding the top and bottom structures together, Most of the hoods you buy from our competitors rely on you or your body shop to make those repairs before painting the hood.
Pulling all this together. The hoods made by H.O. Fibertrends give you the best value in a quality well fitting body part.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends 2.5" Cowl Induction Hood 99-04 Mustang
|
|
Our Price: $389.88
|
|
|
The 2 1/2 inch hood cowl induction scoop rises quickly to give you needed under hood clearance. The perimeter hood design gives exceptional strength and keeps the weight down to approx. 21 Lbs. Comes with a metal latch just like your factory hood. All our hoods come with hinge and latch mounting points ready to use.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends 4" Cowl Induction Hood 99-04 Mustang
|
|
Our Price: $389.88
|
|
|
The 4 inch hood cowl induction scoop rises quickly to give you needed under hood clearance.
The perimeter hood design gives exceptional strength and keeps the weight down to approx. 22 Lbs.
Comes with a metal latch just like your factory hood.
All our hoods come with hinge and latch mounting points ready to use.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends Cobra R Hood 99-04 Mustang
|
|
Our Price: $389.88
|
|
|
The Cobra R hood is the hood we make for Ford Motor Company. It has a 2 inch raise that rises quickly to give you needed under hood clearance.
The perimeter hood design gives exceptional strength and keeps the weight down to approx. 21 Lbs.
Comes with a metal latch just like your factory hood.
All our hoods come with hinge and latch mounting points ready to use.
|
|
|
|
|
|
|
|
|
|
H.O. Fibertrends Cobra Hood 94-98 Mustang
|
|
Our Price: $389.88
|
|
|
The Cobra hood with a little extra.
Do those under hood modifications without letting anyone know your cobra isn’t stock. Even with a one inch spacer under the intake requires you to have more clearance for your Cobra The hood raises in such a manner That no one will know. Using and after market intake or adding a spacer under the intake. The stock Cobra will have clearance problems.
Only 24 lbs. Made from high quality hand laid fiberglass. Our hoods are made with a tough white gel-coat surface, that resists fiber strand print through. We only use the very highest quality surface coats, better than the general purpose gel-coats that’s used by most of our competitors.
Our Fiberglass hoods are engineered for strength and reliability.
Instead of the cheap inserts placed into the fiberglass, which can be ripped out the hinge and latch. areas. H.O. Fibertrends takes the time to laminate blocks of aircraft quality aluminum into the fiberglass under structure. The hinge areas come predrilled and threaded. The latch is all metal just like your factory hood. So when the hood arrives its ready to be installed.
After our hoods come out of their molds, we remove the flashing and finish the edges for you. Filling the gapes left by bonding the top and bottom structures together, Most of the hoods you buy from our competitors rely on you or your body shop to make those repairs before painting the hood.
Pulling all this together. The hoods made by H.O. Fibertrends give you the best value in a quality well fitting body part.
|
|
|
|
|
|
|
|
|
|
TruFiber Mustang Monster Heat Extraction Hood 99-04 Mustang
|
|
Our Price: $399.88
|
|
|
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
TruFiber Mach 1 Heat Extraction Hood 99-04 Mustang
|
|
Our Price: $399.88
|
|
|
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
TruFiber Cobra R SVO Heat Extraction Hood 99-04 Mustang
|
|
Our Price: $399.88
|
|
|
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
TruFiber Mach 2 Heat Extraction Hood 99-04 Mustang
|
|
Our Price: $399.88
|
|
|
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish
Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
|
|
|
|
|
|
TruFiber Fiberglass 3" Cowl Induction Hood 99-04 Mustang
|
|
Our Price: $399.88
|
|
|
Mustang Fiberglass Hood: 1999-2004 3" Cowl InductionAll Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.1. Hand laid fiberglass for show quality finish2. OEM steel riveted latch plate provides added safety during extreme speeds3. Intergraded stainless steel mesh grill vents4. Ram-Air exit duct to supply engine with outside cold air for added performance5. Air outlet vents to releae hot air for maximum engin compartment cooling6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish Each product is an exact fit to your model’s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.
|
|
|
|
