You are here: Home > Chevy Small Block
Sort By:
Page of 1  
Edelbrock Performer RPM Cam & Lifter Kit SBC
Our Price: $169.88

Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 308/318, Lift .488/.510, Chevy, Small Block, Kit

Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,500-6,500
Intake Duration at 050 inch Lift: 234
Exhaust Duration at 050 inch Lift: 244
Duration at 050 inch Lift: 234 int./244 exh.
Advertised Intake Duration: 308
Advertised Exhaust Duration: 318
Advertised Duration: 308 int./318 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.488 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.488 int./0.510 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Quantity: Sold as a kit.

The heart of the Total Power Package.  Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
Edelbrock Performer Intake Manifold SBC
Our Price: $224.88

Intake Manifold, Performer, Dual Plane, Aluminum, Polished, Square/Spread Bore Flange, Chevy, Small Block,Each

Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Polished
Intake Material: Aluminum
EGR: No
Quantity: Sold individually.
Notes: Has un-machined boss for oil-fill tube. Accepts late model choke, water neck, air conditioning, alternator, and HEI. Adapter plate sold separately.

Low-end torque with improved throttle response.  Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR styles. Many are 50-state street legal.
Edelbrock Performer Cylinder Head SBC Gen1
Our Price: $585.88

Cylinder Head, Performer, Aluminum, Assembled, 70cc Chamber, 170cc Intake Runner, Chevy, 302/327/350/400, Each

Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 70
CNC-Machined Combustion Chamber: No
Intake Runner Volume (cc): 170cc
Exhaust Runner Volume (cc): 60cc
CNC-Machined Intake Runner: No
CNC-Machined Exhaust Runner: No
Intake Port Location: Standard
Exhaust Port Shape: Square
Exhaust Port Location: Standard
Spark Plug Style: Straight
Intake Valves Included: Yes
Intake Valve Diameter (in): 2.020 in.
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.600 in.
Valve Springs Included: Yes
Maximum Valve Lift (in): 0.575 in.
Outside Diameter of Outer Spring (in): 1.450 in.
Damper Spring Included: No
Number of Springs Per Valve: Single
Retainers Included: Yes
Retainer Material: Steel
Locks Included: Yes
Lock Style: 7 degree
Valve Stem Seals Included: Yes
Valve Stem Seal Style: PC seal
Rocker Arm Studs Included: Yes
Rocker Arm Nut Thread Size: 3/8-24 in.
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: Yes
Guideplate Pushrod Size: 5/16 in.
Valve Cover Mounting Style: Perimeter bolt
Accessory Bolt Holes Drilled: Yes
Valve Guides Included: Yes
Valve Guide Material: Manganese bronze
Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle
Valve Seat Material: Ductile iron
Steam Holes Drilled: No
Oiling Style: Through pushrod
Machined for O-Ring: No
Heat Crossover: Yes
Quantity: Sold individually.
Notes: Will not fit centerbolt-style intake manifolds.

Bolt-on power, right out of the box.  All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
Crane Chromemoly Pushrods SBC Gen1
Our Price: $105.88

Pushrods, Chromemoly, Heat-Treated, 5/16 in. Diameter, 7.925 in. Length, Chevy, Small Block, Set of 16

For Use with Guideplates: Yes
Tubing Diameter (in): 5/16 in.
Pushrod Material: Chromemoly
Top Tip Style: Ball
Bottom Tip Style: Ball
Intake Overall Length (in): 7.925 in.
Exhaust Overall Length (in): 7.925 in.
Quantity: Sold as a set of 16.
One Piece Pushrod: No
Oiling: Yes
Tapered: No
Tip Attachment: Press fit/Welded
Top Tip Diameter: 5/16 in.
Bottom Tip Diameter: 5/16 in.
Heat-Treated: Yes

Get the super-tough pushrods!  Crane performance pushrods are made from 4130 chromemoly seamless steel tubing. The ends are precision-made, carburized, heat-treated for strength and wear resistance, and press-fit into the tubing. Some applications are also carbonitride heat-treated to strengthen and harden the tubing for use with or without pushrod guideplates. In these instances, the ends are spot-welded into the tubing for maximum strength and reliability.
Proform High Flow Mechanical Aluminum Water Pump SBC Gen1
Our Price: $92.88

Water Pump, Mechanical, Long, High-Volume, Aluminum, Polished, Chevy, Small Block, Each

Pump Flow: High-volume
Pump Material: Aluminum
Pump Finish: Polished
Rotation: Clockwise
Pilot Diameter (in): 0.625 in.
Quantity: Sold individually.

Stop pesky overheating problems.  These Proform high-flow mechanical aluminum water pumps feature a CNC cast iron impeller spinning on heavy-duty ball bearings. The result is up to 40 percent more coolant flow, giving you real performance value for your dollar. They are available in a natural or polished finish.
Eagle Cast Steel 6-bolt Crankshaft SBC Gen1
Our Price: $189.88

Crankshaft, 2-Piece Seal, External Balance, Cast Steel, Standard Snout, Chevy, Small Block, Each

Rear Main Seal Style: 2-piece
Engine Stroke (in): 3.750 in.
Crankshaft Material: Cast steel
Engine Balance: External
Lightened: No
Requires Narrow Bearings: No
Rod Bearings Included: No
Main Bearings Included: No
Cross-Drilled Mains: No
Rod Journal Diameter (in): 2.100 in.
Main Journal Diameter (in): 2.650 in.
Balancer Bolt Thread Size: 7/16-20 in.
Crankshaft Snout Style: Standard
Quantity: Sold individually.

Cranks you can rely on and afford.  If you need a crankshaft that's dependable, but don't want to empty your bank account, Eagle Specialty Products has the solution. These cast steel crankshafts for Chevy feature .092 radii on rod, main journals, rear seal, and snout for increased strength. Crankshafts for Ford have .125 radii on all rod and main journals. Each crank is inspected for dimension, size, and stroke accuracy, has a journal finish of 6 R.A. or less, and has a target bobweight of +/- 2-percent for reduced balancing time.
ARP Balancer Bolt Kit SBC
Our Price: $19.88

Harmonic Balancer Bolt, Chromemoly, Black Oxide, External 12-Point, Chevy, Small Block, Each

Thread Size: 7/16-20 RH in.
Underhead Length (in): 2.470 in.
Head Style: External 12-point
Washer Included: Yes
Fastener Yield Strength (psi): 200,000 psi
Fastener Material: Chromemoly
Fastener Finish: Black oxide
Quantity: Sold individually.
Notes: Features 5/8 in. socket size.

One tough bolt.  As the crankshaft flexes, the damper absorbs incredible amounts of energy. These damper bolt kits from ARP will ensure that your balancer is locked into position. They feature a 1/4 in. thick wide-area washer and an extra tall 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
ARP Stainless Engine Bolt Kit SBC
Our Price: $94.88

Engine and Accessory Fasteners, Stainless Steel, Hex, Chevy, Small Block, Kit

Fastener Finish: Polished
Fastener Material: Stainless steel
Fastener Head Style: Hex
Intake Manifold Fasteners Included: Yes
Valve Cover Fasteners Included: Yes
Timing Cover Fasteners Included: Yes
Oil Pan Fasteners Included: Yes
Header Fasteners Included: Yes
Water Pump Fasteners Included: Yes
Fuel Pump Fasteners Included: Yes
Water Neck Fasteners Included: Yes
Distributor Clamp Bolt Fastener Included: Yes
Quantity: Sold as a kit.

Rebolt your motor.  These ARP engine bolt kits come in your choice of polished stainless steel or black oxide chromemoly steel bolts with 12-point or hex heads. These kits include the bolts and washers for your engine.
ARP High Performance Cylinder Head Bolt Kit SBC
Our Price: $61.88

Cylinder Head Bolts, High Performance, Hex Head, Chevy, Small Block, Kit

Fastener Style: Bolt
Head Style: Hex
Fastener Material: Chromemoly
Fastener Finish: Black oxide
Washers Included: Yes
Cut to Fit: No
Quantity: Sold as a kit.

Head bolt kits made tough in the USA.  These ARP High Performance series head bolt kits are tough! They are rated at 170,000 psi--15 percent stronger than Grade 8 fasteners. They come available with hex heads or reduced wrenching 12-point heads that eliminate the need for valvetrain removal when re-torquing cylinder heads.
ZEX High Output Nitrous System 100-250 hp 97-04 Chevrolet Gen III LS1 -2 -6
List Price: $826.60
Our Price: $619.88
You Save $206.72!

Nitrous Oxide System, Zex, EFI, Wet, 100-250 hp, 10 lb. Bottle, Purple, Chevy, Gen III, LS1, LS2, LS6

The new ZEX™ Gen III (LS1, -2, -6) High Output Nitrous System incorporates several nitrous technology breakthroughs, making it the cutting edge choice for serious Gen III performance applications. Utilizing the advanced Fuel Shear™ Nozzle Technology and patented Active Fuel Control™ Tuning/Safety Technology, the Gen III (LS1, -2, -6) High Output Nitrous System delivers up to 250 horsepower.
• Tunable from 100-250 horsepower; everything is included for professional installation
• Fuel Shear™ Technology injects enrichment fuel directly into the nitrous plume for better atomization
• Features a patented electronic TPS switch for perfect activation at wide open throttle

Part Number: 82087
Delivery Style: Air intake tube
Nitrous System Style: Wet
Maximum Advertised Horsepower Increase: 250
Activation: TPS
Jet Sizes Included (hp): 100, 125, 150, 175, 250
Dual Stage: No
Bottle Included: Yes
Nitrous Bottle Capacity: 10 lbs.
Bottle Material: Aluminum
Bottle Color: Purple
Bottle Brackets Included: Yes
Bottle Bracket Material: Steel
Quantity: Sold as a kit.
ZEX Nitrous Oxide Wet System 75-125 hp 92-04 Chevrolet Small Block
Our Price: $689.88

Nitrous Oxide System, Zex, Wet, 75-125 hp, 10 lb. Bottle, Polished, Chevy/Pontiac, Corvette/F-Body, Kit

ZEX--more power, in a heartbeat.
ZEX wet nitrous systems rely on advanced fuel-shear technology that places the enrichment fuel inside of the high-velocity nitrous spray cone via a special transfer tube. This ensures complete fuel atomization and maximum power. In addition, ZEX's exclusive throttle-position sensor switch "learns" the voltage curve of the engine's throttle-position sensor to activate the system consistently at full throttle. ZEX systems come pre-assembled and tested, for easy installation. There are no brackets to install or microswitches to adjust, and jet changes are easy, too.

Part Number: 82026P
Delivery Style: Air intake tube
Nitrous System Style: Wet
Maximum Advertised Horsepower Increase: 125
Activation: TPS
Jet Sizes Included (hp): 75, 100, 125
Dual Stage: No
Bottle Included: Yes
Nitrous Bottle Capacity: 10 lbs.
Bottle Material: Aluminum
Bottle Color: Polished
Bottle Brackets Included: Yes
Bottle Bracket Material: Steel
Quantity: Sold as a kit.
Trick Flow Head Combo 62-86 Chevrolet 302/327/350/400
Our Price: $2,099.88

Head Combo, Rockers, Head Bolts, Camshaft, Button and Lock Plate, Lifters, Pushrods, Timing Set, Gaskets, Kit