You are here: Home > Gauges & Accessories
Choose a sub category:
Air / Fuel Air Pressure
Air Temperature Ammeter
Amp Temperature Speedometers
Blower Pressure Boost Pressure
Boost / Vacuum Brake Pressure
Cables & Accessories Clocks
Clusters Controllers
Cylinder Head Pressure Differential Temperature
Exhaust Gas Temperature Fuel Level
Fuel Pressure Hour Meter
Methanol Flow Nitrous Pressure
Oil Pressure Oil Temperature
Pressure Pyrometer
Shift Lights Tachometers
Temperature Transmission Temperature
Vacuum Voltmeter
Water Pressure Water Temperature
Sort By:
Page of 2  
Innovate XD-16 Universal Digital Gauge System
Our Price: $228.88

Gauge Only, XD-16 Universal, Digital, Air/Fuel Ratio, 2 1/16 in. Diameter, Electrical, Each

16 combinations to choose from.
These Innovate XD-16 universal digital gauge systems are designed to be air fuel ratio gauges, but can be configured for a number of other readings as well.

Features include:

* Two bezels, one black and one silver
* Four white faces, one Air/Fuel, one Pressure, one Temperature, and one blank
* Four black faces, one Air/Fuel, one Pressure, one Temperature, and one blank
* 3/4 in. thickness
* 3-character LED yellow display
* Programmable digital needle
* Billet aluminum bezel
* Requires the use of a wideband controller
Gauge Style: Innovate XD-16 digital
Gauge Type: Air/Fuel ratio
Shape: Round
Gauge Diameter (in): 2 1/16 in.
Gauge Diameter (mm): 52.00mm
Sweep: Digital numeric
Sending Unit: Electrical
Gauge Number Color: Yellow
OEM Replacement: No
Sending Unit Included: No
Quantity: Sold individually.
Gauge Series: Digital
Innovate XD-16 Stand Alone Digital Gauge System
Our Price: $499.88

Gauges, Digital, Data Acquisition, XD-16 Stand Alone, Kit

16 combinations to choose from.
These Innovate XD-16 stand alone digital gauge systems are designed to be air/fuel ratio gauges, but can be configured for a number of other readings as well.

Features include:

* Two bezels, one black and one silver
* Four white faces, one Air/Fuel, one Pressure, one Temperature, and one blank
* Four black faces, one Air/Fuel, one Pressure, one Temperature, and one blank
* 3/4 in. thickness
* 3-character LED yellow display
* Programmable digital needle
* Billet aluminum bezel
* Patented LC-1 wideband controller
* Bosch 5-wire oxygen sensor, bung, and plug
* CD software
* Quick-start guide
* Mounting hardware kit
* PC cable connection for real time logging and programming
AeroForce Interceptor Scanning Gauge Kit 96-07 GM Cars/Trucks
List Price: $239.00
Our Price: $229.88
You Save $9.12!

The Interceptor is capable of displaying the following parameters, two at a time (8
using cyclic scan), at an adjustable rate of up to approximately 20 times per second.
Not all are supported by every vehicle, so there is no guarantee that the Interceptor
will display all of these on your particular car or truck.  If the vehicle is broadcasting
the parameter, the Interceptor will recognize this and make it available for display.
A sample of some of the parameters is listed below:

# RPM
# MPH
# Intake Air Temperature
# Mass Air Flow Sensor Frequency
# Mass Air Flow Sensor (lb/min.)
# Engine Coolant Temperature
# Injector Pulse Width (bank 1 and 2 if supported)
# Long Term Fuel Trim (bank 1 and 2 if supported)
# Short Term Fuel Trim (bank 1 and 2 if supported)
# O2 Sensor Voltage (bank 1 and 2 if supported)
# Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
# Ignition Advance
# Knock Retard
# Engine Run Time
# Misfire information
# Battery Voltage
# Transmission Temperature
# Transmission slip speed
# Remaining fuel
# Throttle Position Percentage
# Throttle Position Voltage
# Oil temperature
# Oil pressure (some 8 cylinder engines)
# Fuel economy (vehicle must have a MAF
# Horsepower     sensor for these 2 items)
# Two user configurable analog inputs
# Fueling status (open or closed loop)
# and many more...




The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!
Warranty

Aeroforce Technology Inc. warrants this product and its accessories against defects in
material and workmanship for a period of 1 year from the date of purchase.  

   * RPM
   * MPH
   * Intake Air Temperature pre intercooler
   * Intake Air Temperature post Intercooler *
   * Mass Air Flow Sensor Frequency *
   * Mass Air Flow Sensor (lb/min.)
   * Engine Coolant Temperature
   * Injector Pulse Width
   * Long Term Fuel Trim
   * Short Term Fuel Trim
   * O2 Sensor Voltage
   * Manifold Pressure in PSI (Boost pressure)
   * Supercharger Inlet Pressure *
   * Ignition Advance
   * Knock Retard *
   * Engine Run Time
   * Battery Voltage
   * Throttle Position Percentage
   * Engine Load
   * Instantaneous fuel economy
   * Horsepower
   * Analog input #1
   * Analog input #2


The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!

Dual Interceptor Option:  Two Interceptors can be purchased with a special splitter
cable that allows both gauges to operate simultaneously.    A triple gauge set can be
purchased through special order.  

Click here for the Application Guide: http://www.aeroforcetech.com/files/Aeroforce_application_guide_basic2.pdf

Customize your gauge by choosing one of the optional warning light colors: Blue, Green, Yellow, or Orange. Standard color is Red. There is a additional $20 dollar charge for the custom colors but the red comes with no extra charge.

Please allow 2-3 extra days for delivery needed to customize the gauge.

*Note: If you own of the listed vehicles below please specify year in the customer notes section:

Corvette, Silverado, Impala, Tahoe, Trailblazer, Rendevous, Ranier, Lacrosse, CTS, CTS-V, Escalade, Envoy, Sierra, Yukon, Ranier, Grand Prix, GTO
AeroForce Interceptor Scanning Gauge Kit 96-97 GM Cars/Trucks
List Price: $239.00
Our Price: $229.88
You Save $9.12!

The Interceptor is capable of displaying the following parameters, two at a time (8 using cyclic scan), at an adjustable rate of up to approximately 20 times per second.  Not all are supported by every vehicle, so there is no guarantee that the Interceptor will display all of these on your particular car or truck.  If the vehicle is broadcasting the parameter, the Interceptor will recognize this and make it available for display.
A sample of some of the parameters is listed below:

# RPM
# MPH
# Intake Air Temperature
# Mass Air Flow Sensor Frequency
# Mass Air Flow Sensor (lb/min.)
# Engine Coolant Temperature
# Injector Pulse Width (bank 1 and 2 if supported)
# Long Term Fuel Trim (bank 1 and 2 if supported)
# Short Term Fuel Trim (bank 1 and 2 if supported)
# O2 Sensor Voltage (bank 1 and 2 if supported)
# Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
# Ignition Advance
# Knock Retard
# Engine Run Time
# Misfire information
# Battery Voltage
# Transmission Temperature
# Transmission slip speed
# Remaining fuel
# Throttle Position Percentage
# Throttle Position Voltage
# Oil temperature
# Oil pressure (some 8 cylinder engines)
# Fuel economy (vehicle must have a MAF
# Horsepower     sensor for these 2 items)
# Two user configurable analog inputs
# Fueling status (open or closed loop)
# and many more...




The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!
Warranty

Aeroforce Technology Inc. warrants this product and its accessories against defects in
material and workmanship for a period of 1 year from the date of purchase.  

Dual Interceptor Option:  Two Interceptors can be purchased with a special splitter
cable that allows both gauges to operate simultaneously.    A triple gauge set can be
purchased through special order.  

Click here for the Application Guide: http://www.aeroforcetech.com/files/Aeroforce_application_guide_basic2.pdf

Customize your gauge by choosing one of the optional warning light colors: Blue, Green, Yellow, or Orange. Standard color is Red. There is a additional $20 dollar charge for the custom colors but the red comes with no extra charge.

Please allow 2-3 extra days for delivery needed to customize the gauge.

*Note: If you own of the listed vehicles below please specify year in the customer notes section:

Corvette, Silverado, Impala, Tahoe, Trailblazer, Rendevous, Ranier, Lacrosse, CTS, CTS-V, Escalade, Envoy, Sierra, Yukon, Ranier, Grand Prix, GTO
AeroForce Interceptor Scanning Gauge Kit 03-09 GM Cars/Trucks
List Price: $239.00
Our Price: $229.88
You Save $9.12!

The Interceptor is capable of displaying the following parameters, two at a time (8 using cyclic scan), at an adjustable rate of up to approximately 20 times per second.  Not all are supported by every vehicle, so there is no guarantee that the Interceptor will display all of these on your particular car or truck.  If the vehicle is broadcasting the parameter, the Interceptor will recognize this and make it available for display.
A sample of some of the parameters is listed below:

# RPM
# MPH
# Intake Air Temperature
# Mass Air Flow Sensor Frequency
# Mass Air Flow Sensor (lb/min.)
# Engine Coolant Temperature
# Injector Pulse Width (bank 1 and 2 if supported)
# Long Term Fuel Trim (bank 1 and 2 if supported)
# Short Term Fuel Trim (bank 1 and 2 if supported)
# O2 Sensor Voltage (bank 1 and 2 if supported)
# Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
# Ignition Advance
# Knock Retard
# Engine Run Time
# Misfire information
# Battery Voltage
# Transmission Temperature
# Transmission slip speed
# Remaining fuel
# Throttle Position Percentage
# Throttle Position Voltage
# Oil temperature
# Oil pressure (some 8 cylinder engines)
# Fuel economy (vehicle must have a MAF
# Horsepower     sensor for these 2 items)
# Two user configurable analog inputs
# Fueling status (open or closed loop)
# and many more...




The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!
Warranty

Aeroforce Technology Inc. warrants this product and its accessories against defects in
material and workmanship for a period of 1 year from the date of purchase.  

Dual Interceptor Option:  Two Interceptors can be purchased with a special splitter
cable that allows both gauges to operate simultaneously.    A triple gauge set can be
purchased through special order.  

Click here for the Application Guide: http://www.aeroforcetech.com/files/Aeroforce_application_guide_basic2.pdf

Customize your gauge by choosing one of the optional warning light colors: Blue, Green, Yellow, or Orange. Standard color is Red. There is a additional $20 dollar charge for the custom colors but the red comes with no extra charge.

Please allow 2-3 extra days for delivery needed to customize the gauge.

*Note: If you own of the listed vehicles below please specify year in the customer notes section:

Corvette, Silverado, Impala, Tahoe, Trailblazer, Rendevous, Ranier, Lacrosse, CTS, CTS-V, Escalade, Envoy, Sierra, Yukon, Ranier, Grand Prix, GTO
MSD DashHawk Vehicle Information Display
Our Price: $299.88

Keep a sharp eye on your vehicle’s performance and vitals with MSD’s new information display, the DashHawk! Your vehicle’s computer contains a wealth of information and the DashHawk lets you tap into it all! With the Universal OBD-II scanner and multi-gauge performance meter, you can truly understand how your vehicle is performing ‑ which means you can drive more fuel efficiently on the road, race faster at the track, and spot maintenance issues before they leave you stranded.

# Predefined "Factory Default" Displays showing OBDII Parameter IDs (PIDs) in an organized fashion.
# User defined Displays that can show any supported PID subset in a user chosen format
# 2 Function Digital (Two large font numeric parameters on your screen)
# 3 Function Digital (Three medium font numeric parameters on your screen)
# 4 Function Digital (Four medium font numeric parameters on your screen)
# 2 Function BAR (Two large font numeric parameters with an updating "Bar" gauge on your screen)
# 6 Function Digital (Six small font numeric parameters on your screen)
# 7 Function Digital (Seven small font numeric parameters in a list)
# User navigation of displays via the UP and DOWN keys
# Real-Time Fuel System Status (on Vehicles that support Fuel System Reporting)
# Menu timeouts when no key presses are detected (which returns the user to the previously selected display)
# Variable polling schedules for PIDs to reduce CAN bus load
# Data Logging capability (on-board) that can be uploaded to a PC via the USB connection
# The device is updatable via the USB connection and downloads / software from MSD
# LED backlight color is user customizable
# User selectable/changeable Alerts
# 0-60 Times with Speed and RPM recorded
# 1/4 mile Times/ET (with 60 ft and 1/8 mile splits) with Speed, RPM and Two O2 inputs recorded
# 0-60, 1/4 mile, and Data Logging data can be uploaded to a PC via the USB connection

Universal Parameters

   * Calculated Engine Load
   * Engine Coolant Temp (ECT)
   * Short Term Fuel Trim Bank 1
   * Short Term Fuel Trim Bank 2
   * Long Term Fuel Trim Bank 1
   * Long Term Fuel Trim Bank 2
   * Fuel Pressure (KPA)
   * Manifold Absolute Pressure (MAP)
   * Engine RPM
   * Vehicle Speed
   * Timing Advance (Spark)
   * Intake Air Temp (IAT)
   * Mass Air Flow (MAF)
   * Absolute Throttle Position
   * O2 Bank 1 Sensor 1
   * O2 Bank 1 Sensor 2
   * O2 Bank 1 Sensor 3
   * O2 Bank 1 Sensor 4
   * O2 Bank 2 Sensor 1
   * O2 Bank 2 Sensor 2
   * O2 Bank 2 Sensor 3
   * O2 Bank 2 Sensor 4
   * Relative Fuel Pressure
   * Diesel Fuel Pressure
   * Commanded EGR Duty Cycle
   * EGR Error
   * Commanded EVAP Purge Duty Cycle
   * Fuel Level
   * Evap Vapor Pressure
   * Barometric Pressure
   * Catalyst Temp Bank 1 Sensor 1
   * Catalyst Temp Bank 1 Sensor 2
   * Catalyst Temp Bank 2 Sensor 1
   * Catalyst Temp Bank 2 Sensor 2
   * Module Voltage
   * Absolute Load
   * Commanded Equivalence Ratio
   * Relative Throttle Position
   * Ambient Air Temp (AAT)
   * Absolute Throttle Position B
   * Absolute Throttle Position C
   * Absolute Pedal Position D
   * Absolute Pedal Position E
   * Absolute Pedal Position F
   * Commanded Throttle Actuator


GM Enhanced Parameters

   * BLM Cell #
   * Torque Management Spark Retard (Shift)
   * Commanded A/F Ratio
   * Knock Retard
   * Cylinder That Knocked
   * Learned Spark
   * Oil Pressure (new in v1.0.2!)
   * Calculated Vacuum (GM)
   * Calculated Air Flow (GM)
   * Current Misfire Cyl 1 (GM)
   * Current Misfire Cyl 2 (GM)
   * Current Misfire Cyl 3 (GM)
   * Current Misfire Cyl 4 (GM)
   * Current Misfire Cyl 5 (GM)
   * Current Misfire Cyl 6 (GM)
   * Current Misfire Cyl 7 (GM)
   * Current Misfire Cyl 8 (GM)
   * Total Misfires (GM)
   * History Misfire Cyl 1 (GM)
   * History Misfire Cyl 2 (GM)
   * History Misfire Cyl 3 (GM)
   * History Misfire Cyl 4 (GM)
   * History Misfire Cyl 5 (GM)
   * History Misfire Cyl 6 (GM)
   * History Misfire Cyl 7 (GM)
   * History Misfire Cyl 8 (GM)
   * Misfire Cycles (GM)
   * Desired Throttle Position (GM)
   * Pedal Rotation (GM)
   * Fan Speed (GM)
   * Desired Fan Speed (GM)
   * Fan Speed Error % (GM)
   * Command Fans 1, 2, 3 ON/OFF
   * Command Fuel Trim Reset
   * Command Crank Angle Sensor Error (CASE) Relearn

Ford Enhanced PID’s

   * Engine Oil Temp
   * Trans Fluid Temp
   * Cylinder Head Temp
   * Fuel Pressure
   * Torque Converter Slippage
   * Pedal Position

Dodge/Chrysler (DCx)
Enhanced PID’s

   * Knock Sensor 1 Voltage
   * Knock Sensor 2 Voltage
   * Spark Retard (Knock Retard

   * More manufacturer specific functions/para
Nordskog Factory Replacement Digital Buick/Chevy/Olds/Pontiac
Our Price: $429.88

Gauge Panel, Tach, Fuel Level, Oil Pressure, Speedometer, Volts, Water Temp., Buick/Chevy/Olds/Pontiac, Kit

Accuracy, reliability, and cool looks in one package.
These sophisticated factory replacement digital gauge panels have Hewlett Packard LEDs in green and super bright red for direct sunlight viewing. Their RISC-based microprocessors help provide accurate and stable readings of vital performance information. The panels include a 0 to 300 mph speedometer, odometer, tripometer, 0 to 9,900 rpm tachometer, water temperature, volts, oil pressure, and fuel level gauges--all of which connect to the factory sending units. The speedometer even has a self-calibration feature, and it remembers top speed, 0 to 60 times, and 1/4 mile ETs. The high tech gauges also incorporate auto night dimming and completely black out when the ignition is turned off. They fit perfectly into your vehicle and they feature a lifetime warranty.

Part Number: NRD-DP9255R
Gauge Style: Nordskog Factory Replacement Digital
Gauge Series: Digital
Warning Lights Included: Yes
Gauge Face Color: Black
Gauge Number Color: Red
Bezel Color: Black
Fuel Pressure Gauge Included: No
Fuel Level Gauge Included: Yes
Water Temperature Gauge Included: Yes
Voltage Gauge Included: Yes
Ammeter Gauge Included: No
Oil Temperature Gauge Included: No
Oil Pressure Gauge Included: Yes
Speedometer Gauge Included: Yes
Pyrometer Gauge Included: No
Tachometer Gauge Included: Yes
Boost Gauge Included: No
Transmission Temperature Gauge Included: No
Clock Included: No
Gauge Panel Included: No
Gauge Panel Material: Plastic
Gauge Panel Finish: Black
Gauge Pod Included: No
Sending Unit Included: Yes
Quantity: Sold as a kit.
Nordskog Factory Replacement Digital ford
Our Price: $439.88

Gauge Panel, Digital, Oil Pressure, Water Temperature, Volts, Speedometer, Tachometer, Fuel Level, Ford, Kit

Accuracy, reliability, and cool looks in one package.
These sophisticated factory replacement digital gauge panels have Hewlett Packard LEDs in green and super bright red for direct sunlight viewing. Their RISC-based microprocessors help provide accurate and stable readings of vital performance information. The panels include a 0 to 300 mph speedometer, odometer, tripometer, 0 to 9,900 rpm tachometer, water temperature, volts, oil pressure, and fuel level gauges--all of which connect to the factory sending units. The speedometer even has a self-calibration feature, and it remembers top speed, 0 to 60 times, and 1/4 mile ETs. The high tech gauges also incorporate auto night dimming and completely black out when the ignition is turned off. They fit perfectly into your vehicle and they feature a lifetime warranty.

Part Number: NRD-DP5301-B
Gauge Style: Nordskog Factory Replacement Digital
Gauge Series: Digital
Warning Lights Included: Yes
Gauge Face Color: Black
Gauge Number Color: Blue
Bezel Color: Black
Fuel Pressure Gauge Included: No
Fuel Level Gauge Included: Yes
Water Temperature Gauge Included: Yes
Voltage Gauge Included: Yes
Ammeter Gauge Included: No
Oil Temperature Gauge Included: No
Oil Pressure Gauge Included: Yes
Speedometer Gauge Included: Yes
Pyrometer Gauge Included: No
Tachometer Gauge Included: Yes
Boost Gauge Included: No
Transmission Temperature Gauge Included: No
Clock Included: No
Gauge Panel Included: Yes
Gauge Panel Material: Plastic
Gauge Panel Finish: Black
Gauge Pod Included: No
Sending Unit Included: Yes
Quantity: Sold as a kit.
Nordskog Factory Replacement Digital Chevy Bel Air
Our Price: $429.88

Gauge Kit, Digital, Oil Press., Water Temp., Volts, Speedometer, Tach, Fuel Level, Chevy, Bel Air 1957, Kit

Accuracy, reliability, and cool looks in one package.
These sophisticated factory replacement digital gauge panels have Hewlett Packard LEDs in green and super bright red for direct sunlight viewing. Their RISC-based microprocessors help provide accurate and stable readings of vital performance information. The panels include a 0 to 300 mph speedometer, odometer, tripometer, 0 to 9,900 rpm tachometer, water temperature, volts, oil pressure, and fuel level gauges--all of which connect to the factory sending units. The speedometer even has a self-calibration feature, and it remembers top speed, 0 to 60 times, and 1/4 mile ETs. The high tech gauges also incorporate auto night dimming and completely black out when the ignition is turned off. They fit perfectly into your vehicle and they feature a lifetime warranty.

Part Number: NRD-DP7002R
Gauge Style: Nordskog Factory Replacement Digital
Gauge Series: Digital
Warning Lights Included: Yes
Gauge Face Color: Black
Gauge Number Color: Red
Bezel Color: Black
Fuel Pressure Gauge Included: No
Fuel Level Gauge Included: Yes
Water Temperature Gauge Included: Yes
Voltage Gauge Included: Yes
Ammeter Gauge Included: No
Oil Temperature Gauge Included: No
Oil Pressure Gauge Included: Yes
Speedometer Gauge Included: Yes
Pyrometer Gauge Included: No
Tachometer Gauge Included: Yes
Boost Gauge Included: No
Transmission Temperature Gauge Included: No
Clock Included: No
Gauge Panel Included: Yes
Gauge Panel Material: Plastic
Gauge Panel Finish: Black
Gauge Pod Included: No
Sending Unit Included: Yes
Quantity: Sold as a kit.
Auto Meter Tachometer Pods
Our Price: $57.88

Gauge Mounting Pod, Single 5.0 in. Tachometer, Dual 2 5/8 in. Gauges, for use on Honda®, Civic, Each

Hold your tach in style.
Auto Meter tachometer pods put your tachometer squarely where you can see it. That's because they're custom-fit for your ride, which means that not only do they offer great looks, but they also deliver easy installation. That's a tough combination to beat.

Part Number: ATM-49202
Pod Style: Triple
Pod Color: Black
Tachometer Diameter: 5 in.
Tachometer Gauge Included: No
Gauge Diameter (in): 2 5/8 in.
Gauges Included: No
Quantity: Sold individually.
Notes: Fits 2 gages that are 2 5/8 in.
Auto Meter Cobalt Digital Combination Speedometer/Tachometer Gauges
Our Price: $309.88

Combo Gauge, Speedometer/ Tachometer, Cobalt, Digital, 3 3/ 8 in., 160 mph, 8,000 rpm, Each

A combination tachometer and speedometer in one package with a digital readout display.
These Auto Meter Cobalt digital combination speedometer/tachometer gauges are the newest additions to Auto Meter's lineup. They feature aluminum construction with a black face, black bezel, and blue number display. The top display is the digital rpm, the middle display is the mph, and the bottom display is the odometer. With two separate trip odometer settings, you will be able to keep track of your trips with no problem. The Auto Meter Cobalt digital combination speedometer/tachometer gauges use the new simple E-Z CAL system--just push a button, drive two miles, and push the button again to recalibrate. They're perfect when changing gear ratios or switching to a larger tire size. These Auto Meter Cobalt digital combination speedometer/tachometer gauges give you the accuracy and reliability that you expect from Auto Meter.

Part Number: ATM-6987
Gauge Style: Auto Meter Cobalt digital
Oil Pressure Gauge Included: No
Water Temperature Gauge Included: No
Voltage Gauge Included: No
Ammeter Gauge Included: No
Speedometer Gauge Included: Yes
Tachometer Gauge Included: Yes
Fuel Level Gauge Included: No
Fuel Pressure Gauge Included: No
Oil Temperature Gauge Included: No
Pyrometer Gauge Included: No
Transmission Temperature Gauge Included: No
Boost Gauge Included: No
Clock Included: No
Warning Lights Included: No
Gauge Face Color: Black
Gauge Number Color: Blue
Bezel Color: Black
Gauge Series: Digital
Mounting Bracket Included: No
Quantity: Sold individually.
Auto Meter Ultra-Lite Digital Combination Speedometer/Tachometer Gauges
Our Price: $249.88

Combo Gauge, Speedometer/Tachometer, Ultra Lite, Digital, 3 3/8 in., 0-160 mph/0-10,000 rpm, Each

A combination tachometer and speedometer in one package with a digital readout display.
These Auto Meter Ultra-Lite digital combination speedometer/tachometer gauges are the newest additions to Auto Meter's lineup. They feature aluminum construction with a silver face, silver bezel, and red number display. The top display is the digital rpm, the middle display is the mph, and the bottom display is the odometer. With two separate trip odometer settings, you will be able to keep track of your trips with no problem. The Auto Meter Ultra-Lite digital combination speedometer/tachometer gauges use the new simple E-Z CAL system--just push a button, drive two miles, and push the button again to recalibrate. They're perfect when changing gear ratios or switching to a larger tire size. These Auto Meter Ultra-Lite digital combination speedometer/tachometer gauges give you the accuracy and reliability you expect from Auto Meter.

Part Number: ATM-6587
Gauge Style: Auto Meter Ultra-Lite digital
Oil Pressure Gauge Included: No
Water Temperature Gauge Included: No
Voltage Gauge Included: No
Ammeter Gauge Included: No
Speedometer Gauge Included: Yes
Tachometer Gauge Included: Yes
Fuel Level Gauge Included: No
Fuel Pressure Gauge Included: No
Oil Temperature Gauge Included: No
Pyrometer Gauge Included: No
Transmission Temperature Gauge Included: No
Boost Gauge Included: No
Clock Included: No
Warning Lights Included: No
Gauge Face Color: Silver
Gauge Number Color: Red
Bezel Color: Silver
Gauge Series: Digital
Mounting Bracket Included: No
Quantity: Sold individually.
AeroForce Interceptor Scanning Gauge Kit 04-07 Saturn Ion Redline 05-07 Cobalt SS
List Price: $239.00
Our Price: $229.88
You Save $9.12!

This Interceptor gauge addresses the unique features of the supercharged Saturn Ion  
Redline and Chevrolet Cobalt SS.  The gauge will display boost, both primary (just past
the air intake filter) and secondary (just past the Intercooler) intake temperatures, knock
retard, engine coolant temp., ignition advance, supercharger inlet pressure,as well as a
host of others listed below. If you own one of these cars and care about its performance, this information is invaluable, as well as unattainable in any other device for under a couple thousand dollars. They also have a custom power up screen specific to the vehicle.  Like the standard Interceptor, these gauges are capable of displaying the following parameters, two at a time, at a rate of approximately 20 times per second.

   * RPM
   * MPH
   * Intake Air Temperature pre intercooler
   * Intake Air Temperature post Intercooler *
   * Mass Air Flow Sensor Frequency *
   * Mass Air Flow Sensor (lb/min.)
   * Engine Coolant Temperature
   * Injector Pulse Width
   * Long Term Fuel Trim
   * Short Term Fuel Trim
   * O2 Sensor Voltage
   * Manifold Pressure in PSI (Boost pressure)
   * Supercharger Inlet Pressure *
   * Ignition Advance
   * Knock Retard *
   * Engine Run Time
   * Battery Voltage
   * Throttle Position Percentage
   * Engine Load
   * Instantaneous fuel economy
   * Horsepower
   * Analog input #1
   * Analog input #2


*  Critical tuning parameters not found on most other scan tools for the Cobalt/Redline!

The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!
Warranty

Aeroforce Technology Inc. warrants this product and its accessories against defects in
material and workmanship for a period of 1 year from the date of purchase.  

   * RPM
   * MPH
   * Intake Air Temperature pre intercooler
   * Intake Air Temperature post Intercooler *
   * Mass Air Flow Sensor Frequency *
   * Mass Air Flow Sensor (lb/min.)
   * Engine Coolant Temperature
   * Injector Pulse Width
   * Long Term Fuel Trim
   * Short Term Fuel Trim
   * O2 Sensor Voltage
   * Manifold Pressure in PSI (Boost pressure)
   * Supercharger Inlet Pressure *
   * Ignition Advance
   * Knock Retard *
   * Engine Run Time
   * Battery Voltage
   * Throttle Position Percentage
   * Engine Load
   * Instantaneous fuel economy
   * Horsepower
   * Analog input #1
   * Analog input #2


*  Critical tuning parameters not found on most other scan tools for the Cobalt/Redline!
Technical Information (Saturn Ion Redline/Chevy Cobalt SS edition)


The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size.  A 5' cable is included with appropriate OBD2 connector.  A splitter cable
is included with the dual Interceptor units.  Gauges come with a standard black bezel or
optional anodized aluminum or chrome bezel.  State bezel preference when ordering.

A function menu is available by pushing both buttons simultaneously.  The first menu
option allows you to enter a record mode.  Once selected, the Interceptor will return to
normal scan mode, but will start recording the displayed data automatically when the
throttle exceeds 50% and engine load exceeds 65%.  Approximately 50-60 seconds of data
will be stored.  Returning to the menu screen, you can choose to replay the stored data on
the Interceptor display.  

Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the  IMAGES section of this site).   Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image).  Not only can this be
visually appealing but beneficial in changing lighting conditions.  Positive images are
easier to read in bright sunlight, negative at night.

The Interceptor's scan rate can also be adjusted through a menu function.

DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options.  Click
here for a list of powertrain diagnostic trouble code explainations.

High intensity LEDs can be used as shift lights or warning lights to indicate when a
selected parameter exceeds an entered threshold.   Due to the gauges extremely fast
update rate, this light is very accurate and easy to set.  Once you try it you'll find you can't live
without it!

The Interceptor will measure 0-60 times, as well as 1/8 and 1/4 mile time and speeds.  
This is accomplished through a simple menu selection.  See if those mods really do work!

Finally the two analog inputs can be configured through menu choices.  A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units.   These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc.  These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.

Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source.  Virtually plug-and-play!

Dual Interceptor Option:  Two Interceptors can be purchased with a special splitter
cable that allows both gauges to operate simultaneously.    A triple gauge set can be
purchased through special order.  

Click here for the Application Guide: http://www.aeroforcetech.com/files/Aeroforce_application_guide_basic2.pdf

Customize your gauge by choosing one of the optional warning light colors: Blue, Green, Yellow, or Orange. Standard color is Red. There is a additional $20 dollar charge for the custom colors but the red comes with no extra charge.

Please allow 2-3 extra days for delivery needed to customize the gauge.
AeroForce 130 psi oil pressure sensor kit (Includes connector/pigtail)
Our Price: $63.88

The sensor kits are OEM quality units with 0-5v outputs which are
compatible with our gauges.  For those who already have an Aeroforce gauge
these provide an inexepensive and easier alternative to buying and installing
separate gauges for these functions.  

These sensors have a range of 130 psi and come with the proper mating connector
and pigtail.  They have a 3/8" Male NPT fitting.

We also carry steel and aluminum adapters to help with installation.
AeroForce 130 psi fuel pressure sensor kit (Includes connector/pigtail, Viton O-ring)
Our Price: $65.88

The sensor kits are OEM quality units with 0-5v outputs which are
compatible with our gauges.  For those who already have an Aeroforce gauge
these provide an inexepensive and easier alternative to buying and installing
separate gauges for these functions.  

These sensors have a range of 130 psi and come with the proper mating connector
and pigtail.  They have a 3/8" Male NPT fitting.

We also carry steel and aluminum adapters to help with installation.