BMC Performance - Muscle Car High Performance - Challenger, Charger, Magnum, 300, Mustang, GTO, Camaro, Corvette, Viper, Ford GT

You are here: Home > Camaro > 1988-2002

Sort By:

Page of 7

TruFiber Carbon SS Ram Air Hood 98-02 Camaro

Our Price: $449.88

TruFiber Carbon SS Ram Air Hood 98-02 Camaro

All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish

Each product is an exact fit to your model�s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.

TruFiber 4" Cowl Induction Hood 98-02 Camaro

List Price: $449.88
Our Price: $395.88
You Save $54.00!

Camaro Fiberglass Hood: 1998-2002 4" Cowl Induction
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish

Each product is an exact fit to your model�s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.

TruFiber SS Style Spoiler 98-02 Camaro

Our Price: $249.88

Camaro Fiberglass Spoiler: 1998-2002 Super Sport

TruFiber Vintage Heat Extractor Hood 98-02 Camaro

Our Price: $599.88

Camaro Fiberglass Hood: 1998-2002 Vintage (Heat Extractor)

TruFiber Super Sport Fiberglass Hood 93-97 Camaro

Our Price: $499.88

Camaro Fiberglass Hood: 1993-1997 Super Sport 2

All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish

Each product is an exact fit to your model�s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.

TruFiber OEM Super Sport Fiberglass Hood 93-97 Camaro

List Price: $449.88
Our Price: $399.88
You Save $50.00!

Camaro Fiberglass Hood: 1993-1997 Super Sport (OEM Style)
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish

Each product is an exact fit to your model�s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.

TruFiber 3" Cowl Induction Hood 93-97 Camaro

Our Price: $449.88

Camaro Fiberglass Hood: 93-97 3" Cowl Induction
All Trufiber aerodynamic parts and auto accessories give you the best in show and off-road performance. All of our fiberglass and carbon fiber products are designed with the driver and show car enthusiast in mind. Each product contains a variety of features that give your vehicle a true advantage when facing any competitor both in the show or on the trail.
1. Hand laid fiberglass for show quality finish
2. OEM steel riveted latch plate provides added safety during extreme speeds
3. Intergraded stainless steel mesh grill vents
4. Ram-Air exit duct to supply engine with outside cold air for added performance
5. Air outlet vents to releae hot air for maximum engin compartment cooling
6. Pre-drilled wipe nozzle holes to ensure a bolt-on finish

Each product is an exact fit to your model�s body style by year and installs easily and securlly using OEM hardware and manufacturer accessories. We recommend hood pins for all aftermarket hoods.

Lakewood Rear Lower Control Arms 82-02 Camaro, Firebird

Our Price: $119.88

Control Arms, Boxed, Rear, Lower, Steel, Black Powdercoated, Chevy/Pontiac, Camaro/Firebird, Pair

Control Arm Style: Boxed
Adjustable: No
Hardware Included: No
Control Arm Material: Steel
Control Arm Finish: Black powdercoated
Bushings Included: Yes
Bushing Material: Polyurethane
Quantity: Sold as a pair.
Notes: Polyurethane bushings are red.

Increase traction and eliminate wheel hop! These rear lower control bars from Lakewood will greatly increase traction by eliminating wheel hop. They're manufactured from heavy-gauge square steel tubing for strength, eliminating the flex that is common with stock control arms. Polyurethane bushings are also used for stability. These bars bolt directly in the stock location with no modifications required.

Hurst Billet/Plus Shifter 93-02 Camaro, Firebird T-56

Our Price: $199.88

Manual Shifter, Billet/Plus, Chevy/Pontiac, Camaro/Firebird, Each

Installation Kit Required: No
Knob Included: Yes
Accommodates Stock Knob: No
Shifter Boot Included: No
Shifter Finish: Chrome
Quantity: Sold individually.

Hurst shifters combine operation ease and strength. The Hurst Billet/Plus is the next generation of competition transmission controls. Designed with a high pivot mechanism for reduced shifter throw and a patented design for ease of operation, they feature an anodized gold base, polymide pivot cup for reduced vibration, high-strength steel stick, and a heat-treated billet steel gear selector for the ultimate in strength and reliability.

MSD Blaster Coil Pack LS1/LS6

Our Price: $92.88

Ignition Coil, Coil Pack, Square, Red, Epoxy, Chevy/Pontiac, LS1/LS6, Each

Fits: 97-04 Corvette 5.7L / 04 GTO 5.7L / 98-02 Firebird 5.7L / 98-02 Camaro 5.7L

Coil Wire Attachment: Female/Socket
Coil Style: Coil pack
Coil Internal Construction: Epoxy
Mounting Bracket Included: No
Coil Wire Included: No
Ballast Resistor Included: No
Coil Color: Red
Coil Shape: Square
Quantity: Sold individually.
Notes: Fits models with spark plug wire and coil connector entering the same side of the coil.

Get multiple spark from a coil pack. Finally, you can get a performance replacement coil for the popular Gen III GM small block with these LS-1/LS-6 Blaster coils from MSD! This engine, most notably the LS-1 and LS-6, is fast becoming a favorite performance engine. But, not just in Camaros, the new GTO and Corvettes - also in muscle cars and street rods.
The complex electronic controls of the original coils presented the aftermarket with a challenge as the drivers that control the firing of the coils are built into the OE models. MSD engineers were able to design an advanced circuit that will operate with the factory electronics of the Gen III engine controls while producing a higher output spark. Not only do you get a higher voltage spark, but the coil will deliver multiple sparks! That's right - multiple spark discharge coils! Requires a set of eight coil packs to work for your vehicle.

Energy Suspension Polyurethane Bushing Kit 93-02 Camaro, Firebird

Our Price: $159.88

Bushing Kit, Polyurethane, Red, Chevy/Pontiac, Camaro/Firebird, Kit

Bushing Material: Polyurethane
Bushing Color: Red
Front Control Arm Bushings Included: Yes
Rear Control Arm Bushings Included: Yes
Front Sway Bar Bushings Included: Yes
Front Sway Bar Bushings Greaseable: No
Rear Sway Bar Bushings Included: Yes
Rear Sway Bar Bushings Greaseable: No
Front Sway Bar End Links Included: Yes
Rear Sway Bar End Links Included: Yes
Steering Rack Bushings Included: No
Body Mounts Included: No
Front Strut Rod Bushings Included: No
Rear Strut Rod Bushings Included: No
C-Bushings Included: No
Axle Pivot Bushings Included: No
Front Track Arm Bushings Included: No
Rear Track Arm Bushings Included: No
Front Coil Spring Isolators Included: No
Rear Coil Spring Isolators Included: No
Front Leaf Spring Bushings Included: No
Rear Leaf Spring Bushings Included: No
Front Leaf Spring Shackle Bushing Included: No
Rear Leaf Spring Shackle Bushings Included: No
Transmission Shift Stabilizers Included: No
Transmission Mount Included: No
Transmission Crossmember to Frame Bushing Included: No
Rear Trailing Arm Bushings Included: No
Torque Arm Mounts Included: Yes
Strut Tower Bushings Included: No
Rear Panhard Bar Bushings Included: Yes
Rear Leaf Spring Pads Included: No
Rear Spring Cushions Included: No
Front Shock Bushings Included: No
Rear Shock Bushings Included: No
Rear Sub Frame Bushings Included: No
Differential Pinion Bushings Included: No
Rear Differential Carrier Bushings Included: No
Ball Joint Dust Boots Included: No
Tie Rod End Dust Boots Included: Yes
Steering Coupler Bushings Included: No
Rear Overload Spring Snubbers Included: No
Rear Watts Link Bushings Included: No
Front Axle Bump Stops Included: No
Transmission Torque Arm Bushings Included: No
Motor Mounts Included: No
Bar End Grommets Included: No
Lower Control Arm Bump Stops Included: No
Front Bump Stops Included: No
Rear Bump Stops Included: No
Power Steering Ram Bushings Included: No
Differential Carrier Mustache Bar Bushing Included: No
Quantity: Sold as a kit.
Application Notes Will not fit 1LE suspension option.

Give your suspension a performance boost. Proven on the racetrack as well as the street, these Hyperflex bushing kits from Energy Suspension allow you to replace your mushy rubber bushings with high-performance polyurethane versions. Domestic or import, front or rear wheel drive, 2WD or 4WD--all vehicles will achieve a higher level of performance. Hyperflex components will not break down or deteriorate from exposure to oils, undercar chemicals, or atmospheric conditions. They also improve appearance over stock and are available in several different colors to suit all of your needs, from show to go.

FAST Polymer Intake Manifold LS1/LS6

Our Price: $1,029.88

Intake Manifold, Fast LSX, Black, Multi-Port, Chevy/Pontiac, Camaro/Corvette/Firebird, 5.7L,with 92mm T.B.,Kit

Fits: 98-02 Firebird 5.7L / 98-02 Camaro 5.7L / 01-04 Corvette 5.7L

Engine Block Style: Stock/OEM standard deck
Injection Style: Multi-port
Basic Operating RPM Range: 1,800-7,000
Intake Section Included: Complete
EGR: Yes
Injectors Included: No
Fuel Rails Included: No
Aftermarket Fuel Rail Required: No
Throttle Body Included: No
Supplemental Bosses Cast-In: Yes
Supplemental Bosses Machined: No
Supplemental Boss Quantity: Eight
Runners Included: Yes
Runners Removable: Yes
Plenum Material: Polymer
Plenum Finish: Black
Base Material: Polymer
Base Finish: Black
Quantity: Sold as a kit.
Notes: This is a 3-piece unit designed for a 90mm throttle body.

Lightweight, high-tech manifolds. Made from space-age polymer composite material, these FAST LSX multi-piece component intake manifolds show a 20 hp increase on the GM LS1 engine and a 15 hp increase on the GM Corvette LS6 engine, with no loss of drivability or low-rpm torque. Best of all, the FAST space-age composite material polymer intake is 30 percent stronger than the stock polymer unit. Unlike aftermarket aluminum intakes, these intakes avoid becoming power-robbing heat sinks. These manifolds come with integrated nitrous-oxide injector ports and the ability to accept a larger-than-stock throttle body for increased fuel flow. In addition, the LSX manifolds can be ported, and are easily accessible as a result of the multi-piece design.

BBK 80mm Throttle Body 98-02 Camaro, Firebird 04 GTO

Our Price: $379.88

Throttle Body, 80mm, Chevy/GMC/Pontiac, Passenger Car/Pickup, 4.8L/5.3L/5.7L/6.0L, Each

Fits: 99-02 Silverado 4.8L, 5.3L, 6.0L / 04 GTO 5.7L / 99-02 GMC Sierra 4.8L, 5.3L, 6.0L / 98-02 Firebird 5.7L

Throttle Body Style: Multi-port injection, MPI
Airflow Rate (cfm): cfm
Venturi Quantity: 1
Venturi Diameter (mm): 80mm
TPS Sensor Included: No
IAC Motor Included: No
Gaskets Included: Yes
Hardware Included: No
Injectors Included: No
Throttle Body Material: Cast aluminum
Throttle Body Finish: Natural
Quantity: Sold individually.
Notes: Not designed for drive-by-wire applications. Fits model with a throttle cable only.

Bolt on extra horsepower in minutes. BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages, so you know you're getting the best quality product and value possible.

Edelbrock Strut Tower Brace 98-02 Camaro, Firebird

Our Price: $124.88

Strut Brace, Front Upper, Steel, Black Powdercoated, Chevy/Pontiac, Camaro/Firebird, Each

Mounting Position: Front upper
Brace Finish: Black powdercoated
Brace Material: Steel
Quantity: Sold individually.
Notes: With LS1 engine, including vehicles with traction control system.

Increase steering input and reduce chassis flex. These Edelbrock strut tower braces allow the substructure of the chassis to be fully triangulated. This amounts to more precise steering input, better alignment, and reduced flexing, for the ultimate in cornering power and control. They're made from high quality steel tubing, and are black powdercoated for good looks and corrosion resistance.

BBK SSI Performance Intake Manifold 98-04 LS1

Our Price: $484.88

Intake Manifold, SSI, Aluminum, Titanium Powdercoated, Multi-Port, Chevy/Pontiac, 5.7L, Each

Fits: 98-02 Camaro 5.7L / 04 GTO 5.7L / 98-02 Firebird 5.7L / 98-04 Corvette 5.7L

Engine Block Style: Stock/OEM standard deck
Injection Style: Multi-port
Basic Operating RPM Range: 1,000-5,800
Intake Section Included: Complete
EGR: No
Injectors Included: No
Fuel Rails Included: No
Aftermarket Fuel Rail Required: No
Throttle Body Included: No
Supplemental Bosses Cast-In: No
Supplemental Bosses Machined: No
Runners Included: Yes
Runners Removable: No
Plenum Material: Aluminum
Plenum Finish: Light titanium powdercoated
Base Material: Aluminum
Base Finish: Natural
Quantity: Sold individually.

Add horsepower and flow. If you're looking for fuel-injected intake manifold performance, look no further than BBK. These SSI performance intake manifolds are high-flowing, horsepower-adding work hounds designed to provide maximum performance! They're available for a variety of applications to give your street rod the flow it needs and the performance it craves.