You are here: Home > Other Vehicles > Jeep
Choose a sub category:
Jeep SRT8 (06-08)
Sort By:
Page of 2  
Hamburger Throttle Body Spacer 05-09 300, Charger, Challenger, Magnum, Ram, Jeep 5.7L
Our Price: $109.88

Throttle Body Spacer, Torque Curve, Aluminum, Red Anodized, 1 in., Dodge, Car/SUV/Pickup, 5.7L

Bolt-on performance from Hamburger's. Hamburger's Torque Curve throttle body spacers give your vehicle significant torque gains, increased throttle response, and increased fuel mileage. These spacers are manufactured from precision CNC-machined T6 billet aluminum, and are red anodized for a lifetime of good looks!

Spacer Thickness (in): 1.000 in.
Spacer Finish: Red anodized
Spacer Material: Aluminum
Quantity: Sold individually.
MSD 8.5mm Super Conductor Spark Plug Wire Set 03+ 300, Charger, Magnum, Jeep, Ram 5.7L
Our Price: $91.88

Spark Plug Wires, Super Conductor, Spiral Core, 8.5mm, Red, Stock Boots, Chrysler/Dodge, 5.7L, Set

Superior conductivity wires from MSD.
MSD's 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. MSD's 8.5mm Super Conductor wire sets come available in custom or universal-fit applications.

Assembled: Yes
Diameter (mm): 8.50mm
RFI Suppression: Yes
Wire Color: Red
Distributor Terminal Ends: Coil Pack
Distributor Boot Color: Gray
Distributor Boot Material: Silicone
Spark Plug Boot Color: Gray
Spark Plug Boot Material: Silicone
Coil Wire Included: No
Quantity: Sold as a set.
Genuine HotrodLicense Plate Fastener Caps - Many Options
Our Price: $14.88

License Plate Fastener Caps, Set of 4

Dress up your license plate. These decorative license plate frame caps from Genuine Hotrod Hardware are scratch-resistant and fade-proof. They will add that custom finishing touch to your otherwise unsightly license plate fasteners.
Performance Accessories 3" Body Lift Kit '75-'82 Cherokee, Wagoneer
Our Price: $100.88

Body Lift, 3 in., Jeep, Cherokee/Wagoneer, Kit

Get big lift without the big cost. Get up to three inches higher than the rest of the world with one of these Performance Accessories body lift kits. The kits raise your truck's body off of its frame with reinforced nylon lift blocks (rated at 50,000 lbs. per square inch), and include such components as CNC-machined splined steering extensions (where required), bumper brackets (most applications), and zinc plated grade 5 hardware to complete the installation.

Amount of Lift (in): 3.0 in.
Body Lift Block Material: Nylon
Front Bumper Brackets: No
Rear Bumper Brackets: No
Quantity: Sold as a kit.
Billet Window Switch Kit 07+ 300, Charger, Magnum, Caliber, Jeep
Our Price: $99.88

 This fantastic 10 piece window switch kit fits all 2007 Chrysler 300's, Dodge, Charger, Magnum, Caliber, and Jeep Grand Cherokee.

Machined from 6061-T6 aircraft grade aluminum this kit is sure to dress up that dull plastic look. Offered in either polished or satin (shown). Installation takes minutes. Just line our switched up and snap on using the 3M high heat adhesive we provide. These switches will not come off under normal everyday use. If you have used cleaners such as Armor-All the adhesive may have a hard time taking, so take care to clean your OEM switches with a mild soap and water to remove any oily residue before installing. Mirror Control bezel kit sold separately
MSD Early Model Hemi Blaster Coil Packs 03-05 300, Magnum, Jeep, Ram Hemi
List Price: $669.40
Our Price: $482.88
You Save $186.52!

*  Improved Spark Energy
   * Patented winding design and materials
   * Direct bolt-in to factory connectors

Fire up your late model Hemi or Mod Motor with a set of MSD’s Blaster Packs. The Coils are a direct bolt-in and deliver increased spark energy over the factory models. Our engineers spec’d superior materials and winding ratios to increase the output of the coil while retaining the factory fit.
Blaster Hemi Coils, 8-Packs
Early Model, ’03-’05 (PN 82568)
Late Model, ’06-’08 (PN 82558)
MSD 6-Hemi Ignition to Coil Pack Wires 03-05 300, Magnum, Ram, Jeep Hemi
Our Price: $199.88

6-Hemi Harnesses

Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required.
Harness:
’03-’05 PN 88863
’06-’08 PN 88864
Adapter for Factory EFI
’03-’05 PN 88815
’06-’08 PN 88816
BBK Power-Plus Series 70mm Throttle 99-02 Dakota, Ram, Grand Cherokee 4.7L
Our Price: $335.88

Throttle Body, 70mm, Dodge/Jeep, Dakota/Durango/Ram 1500 Pickup/Grand Cherokee, 4.7L, Each

   * Check to make sure this part fits your application

Bolt on extra horsepower in minutes.
BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages, so you know you're getting the best quality product and value possible.
Throttle Body Style: Multi-port injection, MPI
Airflow Rate (cfm): cfm
Venturi Quantity: 1
Venturi Diameter (mm): 70mm
TPS Sensor Included: No
IAC Motor Included: No
Gaskets Included: Yes
Hardware Included: No
Injectors Included: No
Throttle Body Material: Cast aluminum
Throttle Body Finish: Natural
Quantity: Sold individually.
BBK Power-Plus Series Throttle Body 91-03 Cgrand Cherokee, Wrangler, Commander 4.0L
Our Price: $235.88

Throttle Body Assembly; Power-Plus Series; Throttle Body; 62mm

   * Check to make sure this part fits your application

Bolt on extra horsepower in minutes.
BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages, so you know you're getting the best quality product and value possible.
Throttle Body Style: Multi-port injection, MPI
Airflow Rate (cfm): cfm
Venturi Quantity: 1
Venturi Diameter (mm): 62mm
TPS Sensor Included: No
IAC Motor Included: No
Gaskets Included: Yes
Hardware Included: No
Injectors Included: No
Throttle Body Material: Cast aluminum
Throttle Body Finish: Natural
Quantity: Sold individually.
Lokar Flexible and Machined Engine Dipstick 300, Charger, Challenger, Magnum, Jeep, Ram 5.7L
Our Price: $51.88

FLEXIBLE ENGINE DIPSTICK 5.7 HEMI

   * Check to make sure this part fits your application

Slim design allows for easy mounting.
These Lokar flexible and machined engine dipsticks are designed to coordinate with Lokar's flexible transmission dipsticks. Their slim design allows for easy installation inside headers to work with OEM and Sanderson cast exhaust manifolds, have clearance for block hugger headers or apply straight into the engine block (without tube) depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick (depending on your application) for an accurate measure of engine oil.
Locking: No
Dipstick Entry: Timing cover
Dipstick Handle Material: Aluminum
Dipstick Handle Finish: Natural
Dipstick Tube Included: Yes
Dipstick Tube Material: Braided stainless steel
Dipstick Tube Finish: Natural
Quantity: Sold individually.
Percy's Split Lock Friction Lock Header Bolts 05+ 300, Charger, Magnum, Challenger, Jeep 5.7, 6.1L
Our Price: $76.88

Header Bolts, Split-Lock, 8mm x 1.25 in., 12-Point Head, 1 in. UHL, Stainless Steel, Polished, Set of 17

   * Check to make sure this part fits your application

Keep your headers tight and leak-free with Percy's Split Lock Friction Lock header bolts.
Percy's Split Lock Friction Lock header bolts use a locking set pin built into the bolt that, when tightened, expands the bolt threads against the thread wall, providing an unmatched lock. Percy's Split Lock Friction Lock header bolts are the only fasteners that provide a locking system without using any additional wires, locking compounds, or lock washers. They come available in black oxide chromemoly or polished stainless steel finishes.

Part Number: PHP-21011
Fastener Style: Locking bolt
Thread Size: 8mm x 1.25
Head Style: External 12-point
Underhead Length (in): 1.000 in.
Fastener Material: Stainless steel
Fastener Finish: Polished
Quantity: Sold as a set of 17.
Mopar Performance Hemi Street Camshaft 05-08 300, Charger, Magnum, Jeep, Ram 5.7L
Our Price: $649.88

It will increase airflow and engine output at 3,000 rpm and above
while maintaining low rpm drivability characteristics. Requires Non-MDS hydraulic lifters. Recommended Springs: 5.7L Hemi Production Springs.

Specifications:
• Duration @ .006": 259º Intake/267º Exhaust
• Duration @ .050": 204º Intake/210.5º Exhaust
• Lobe Separation: 116º
• Intake Centerline: 120º ATDC
• Lift: .500" Intake/.488" Exhaust
• Basic rpm: 3,000 - 6,200
EBC Yellowstuff Front Brake Pads 07-08 Nitro/Wrangler
Our Price: $132.88

Brake Pads, Yellowstuff 4000 Series, KEVLAR®, Front, Dodge/Jeep, Nitro/Wrangler, Set

Part Number: EBC-DP41798R
For Use with Stock Calipers: Yes
For Use with Stock Rotors: Yes
For Use with Slotted Rotors: Yes
For Use with Cross-Drilled Rotors: Yes
Intended for Street Use: Yes
Brake Pad Material: KEVLAR®
Friction Material Type: Yellowstuff KEVLAR® material
Brake Pad Construction: Integrally molded with shims
Sensor Wire: No
Hardware Included: No
Quantity: Sold as a set.

EBC Yellowstuff KEVLAR® brake pads offer the ultimate in race brake pads.
Although made from a full race material and capable of high-temperature use with very good wear life, these EBC Yellowstuff KEVLAR® pads feature a new trend in race-type brake pad compounds. Their "bite" from cold is superb, which is uncommon with race materials (normally requiring warm-up), and makes these pads safe to use on the highway as well as on the race track. This new formulation was used by numerous championship race and rally drivers in 2004 and is truly a milestone in brake pad material development. They offer a nominal 0.46 friction coefficient with zero rotor damage and low dust.
EBC Yellowstuff Front Brake Pads 07-08 Nitro/Wrangler
Our Price: $101.88

Brake Pads, Greenstuff 7000 Series, Organic, Front, Dodge/Jeep, Nitro/Wrangler, Set

Part Number: EBC-DP71798
For Use with Stock Calipers: Yes
For Use with Stock Rotors: Yes
For Use with Slotted Rotors: Yes
For Use with Cross-Drilled Rotors: Yes
Intended for Street Use: Yes
Brake Pad Material: Organic
Friction Material Type: Greenstuff organic material
Brake Pad Construction: Integrally molded with shims
Sensor Wire: No
Hardware Included: No
Quantity: Sold as a set.

The ultimate SUV front-end pads.
These 7000 Series Greenstuff brake pads from EBC will stop faster and last longer with almost zero brake dust, and are EBC's premium offering for heavy 4x4s. Guaranteed to be noise-free, these pads deliver the stopping power you need!

The features and benefits of this new SUV Supreme Range include:

* Chamfered and slotted
* Factory-shimmed with triple-layer Wolverine shims
* Coated with friction accelerator for fast bed-in
* Higher mileage brake compounds
Hawk Front Brake Pads 07-08 Nitro/Wrangler
Our Price: $70.88

Part Number: HWK-HB569F-650
For Use with Stock Calipers: Yes
For Use with Stock Rotors: Yes
For Use with Slotted Rotors: Yes
For Use with Cross-Drilled Rotors: Yes
Intended for Street Use: Yes
Brake Pad Material: Ferro-carbon
Friction Material Type: HPS
Brake Pad Construction: Integrally molded
Sensor Wire: No
Hardware Included: No
Quantity: Sold as a set.

FRONT PADS

The performance and quality you're looking for in Hawk Performance HPS brake pads.
These Hawk Performance HPS brake pads are designed to ensure performance, safety, and quality on the street. Hawk Performance HPS compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of aerospace design with the braking technology of motorsports.

Features of Hawk Performance HPS brake pads include:

* Extremely low dust
* High friction/torque, hot or cold
* Gentle on rotor
* Virtually noise-free
* Greatly improved braking over OE
* Extended pad life