You are here: Home > Other Vehicles > Chevrolet > Corvette
Sort By:
Page of 8  
Vortech V-2 SQ T-Trim High-Output Satin Supercharger System 06 Corvette Z06
List Price: $6,695.95
Our Price: $6,114.88
You Save $581.07!

Vortech V-2 SQ T-Trim High-Output Satin Supercharger System '06 Corvette Z06
Increase your C6 Z06's horsepower from 500 to 635 and torque from 475 lb./ft. to 540 lb./ft.*

Quality Features:

* Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
* Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger text cell
* Fuel management upgrade includes high-capacity fuel injectors, and a hand-held ECM re-programmer
* Integrated charge cooler configuration allows for additional horsepower gains
* Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions
* Molded inlet duct optimizes available area to supply supercharger air
* Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
* OEM-type cast aluminum mounting bracket for "factory installed" appearance and rigidity
* Maxflow Racing bypass valve provides surge-free compressor operation
* 50-state smog legal under CARB EO# D-213-25

Stock HP/TQ: 500/475
Vortech HP/TQ: 635/475
Boost (PSIG): 6
Includes High-capacity fuel injectors and ECM re-programmer
Carb E.O. D-213-25

Please Note:
*Supercharged horsepower and torque data shown is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements.

Warranty Information
The V-2 T-Trim supercharger is covered by a three-year limited warranty on complete systems.
Borla Stainless Steel Rear Section Exhaust Systems 05-07 Corvette
Our Price: $1,176.88

Exhaust System, Rear Section, Stainless Steel, Natural, Chevy, Corvette 2005-07, 6.0L, Kit

Better flow, better performance.
Want more power and great sound? Borla's rear section exhaust systems include stainless steel pipes and clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Split rear
System Material: Stainless steel
System Finish: Natural
System Style: Rear section
Muffler Included: Yes
Inlet Quantity: Dual
Tip Quantity: Dual
Tip Shape: Round
Tip Cut: Slant
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Notes: Includes special "S-type" muffler.
Borla Stainless Steel Rear Section Exhaust Systems with Turbo Mufflers 05-07 Corvette
Our Price: $1,132.88

Exhaust System, Rear Section, Stainless Steel, Natural, Chevy, Corvette 2005-07, 6.0L, Kit

Better flow, better performance.
Want more power and great sound? Borla's rear section exhaust systems include stainless steel pipes and clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Split rear
System Material: Stainless steel
System Finish: Natural
System Style: Rear section
Muffler Included: Yes
Inlet Quantity: Dual
Tip Quantity: Dual
Tip Shape: Round
Tip Cut: Slant
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Borla Stainless Steel Rear Section Exhaust Systems with S-type Mufflers 06-08 Corvette Z06
Our Price: $1,176.88

Exhaust System, Rear Section, Stainless Steel, Natural, Chevy, Corvette Z06, 7.0L, V8, Kit

Better flow, better performance.
Want more power and great sound? Borla's rear section exhaust systems include stainless steel pipes and clamps, Borla's Turbo mufflers, and intercooled exhaust tips.


Exit Quantity: Dual
Exit Location: Rear center
System Material: Stainless steel
System Finish: Natural
System Style: Rear section
Muffler Included: Yes
Inlet Quantity: Dual
Tip Outlet Size: 4.250 in.
Tip Quantity: Dual
Tip Shape: Round
Tip Cut: Straight intercooled
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Borla Stainless Steel Rear Section Exhaust Systems 05-07 Corvette
Our Price: $1,132.88

Exhaust System, Rear Section, Stainless Steel, Natural, Chevy, Corvette 2005-07, 6.0L, Kit

Better flow, better performance.
Want more power and great sound? Borla's rear section exhaust systems include stainless steel pipes and clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Split rear
System Material: Stainless steel
System Finish: Natural
System Style: Rear section
Muffler Included: Yes
Inlet Quantity: Dual
Tip Quantity: Dual
Tip Shape: Oval
Tip Cut: Slant
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Borla Stainless Steel Cat-Back Systems 05-07 Corvette
Our Price: $1,176.88

Exhaust System, Cat-Back, Stainless Steel, Natural, Chevy, Corvette, 6.0L, Kit

Performance that lasts.
Borla's stainless steel cat-back exhaust systems are backed by Borla's Million Mile warranty, and are dyno-tuned for specific applications. Smog-legal in all 50 states, these systems include stainless steel pipes, clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Rear
System Material: Stainless steel
System Finish: Natural
System Style: Cat-back
Muffler Included: Yes
Inlet Quantity: Dual
Intermediate Pipe Diameter (in): 2.500 in.
Tailpipe Diameter (in): 2.500 in.
Tip Outlet Size: 2.500 in.
Tip Quantity: Dual
Tip Shape: Oblong
Tip Cut: Straight
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Borla Stainless Steel Rear Section Exhaust Systems Polished 06-08 Corvette Z06
Our Price: $1,221.88

Exhaust System, Rear Section, Stainless Steel, Natural, Chevy, Corvette Z06, 7.0L, V8, Kit

Better flow, better performance.
Want more power and great sound? Borla's rear section exhaust systems include stainless steel pipes and clamps, Borla's Turbo mufflers, and intercooled exhaust tips.


Exit Quantity: Dual
Exit Location: Rear center
System Material: Stainless steel
System Finish: Natural
System Style: Rear section
Muffler Included: Yes
Inlet Quantity: Dual
Tip Outlet Size: 4.250 in.
Tip Quantity: Dual
Tip Shape: Round
Tip Cut: Straight intercooled
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
MSD Blaster Coil Pack LS1/LS6
Our Price: $92.88

Ignition Coil, Coil Pack, Square, Red, Epoxy, Chevy/Pontiac, LS1/LS6, Each

Fits: 97-04 Corvette 5.7L / 04 GTO 5.7L / 98-02 Firebird 5.7L / 98-02 Camaro 5.7L

Coil Wire Attachment: Female/Socket
Coil Style: Coil pack
Coil Internal Construction: Epoxy
Mounting Bracket Included: No
Coil Wire Included: No
Ballast Resistor Included: No
Coil Color: Red
Coil Shape: Square
Quantity: Sold individually.
Notes: Fits models with spark plug wire and coil connector entering the same side of the coil.

Get multiple spark from a coil pack.  Finally, you can get a performance replacement coil for the popular Gen III GM small block with these LS-1/LS-6 Blaster coils from MSD! This engine, most notably the LS-1 and LS-6, is fast becoming a favorite performance engine. But, not just in Camaros, the new GTO and Corvettes - also in muscle cars and street rods.
The complex electronic controls of the original coils presented the aftermarket with a challenge as the drivers that control the firing of the coils are built into the OE models. MSD engineers were able to design an advanced circuit that will operate with the factory electronics of the Gen III engine controls while producing a higher output spark. Not only do you get a higher voltage spark, but the coil will deliver multiple sparks! That's right - multiple spark discharge coils! Requires a set of eight coil packs to work for your vehicle.
Borla Stainless Steel Cat-Back Systems 05-07 Corvette
Our Price: $1,503.88

Exhaust System, Cat-Back, Stainless Steel, Natural, Chevy, Corvette 2005-07, 6.0L, Kit

Performance that lasts.
Borla's stainless steel cat-back exhaust systems are backed by Borla's Million Mile warranty, and are dyno-tuned for specific applications. Smog-legal in all 50 states, these systems include stainless steel pipes, clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Split rear
System Material: Stainless steel
System Finish: Natural
System Style: Cat-back
Muffler Included: Yes
Inlet Quantity: Dual
Tip Quantity: Dual
Tip Shape: Oval
Tip Cut: Slant
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Notes: Kit includes merge X-pipe.
Borla Stainless Steel Cat-Back Systems with S Type Mufflers 05-07 Corvette
Our Price: $1,544.88

Exhaust System, Cat-Back, Stainless Steel, Natural, Chevy, Corvette 2005-07, 6.0L, Kit

Performance that lasts.
Borla's stainless steel cat-back exhaust systems are backed by Borla's Million Mile warranty, and are dyno-tuned for specific applications. Smog-legal in all 50 states, these systems include stainless steel pipes, clamps, Borla's Turbo mufflers, and intercooled exhaust tips.
Exit Quantity: Dual
Exit Location: Split rear
System Material: Stainless steel
System Finish: Natural
System Style: Cat-back
Muffler Included: Yes
Inlet Quantity: Dual
Tip Quantity: Single
Tip Shape: Rectangle
Tip Cut: Slant
Tip Edge Style: Rolled edge
Tip Material: Stainless steel
Tip Finish: Polished
Quantity: Sold as a kit.
Notes: Kit includes merge X-pipe and "S-type" muffler.
Hotchkis Sport Suspension Anti-Sway Bar Kits 05-07 Corvette
Our Price: $400.88

Sway Bars, Front 1.25 in. Diameter, Rear 1.125 in. Diameter, Steel, Black, Chevy, Corvette, Kit

Reduce excess chassis movement.
These Hotchkis Sport Suspension anti-sway bars are made from thick high-carbon steel, which reduces excess chassis movement during launch and tightens up body roll around the corners. They come complete with polyurethane bushings, endlinks, and installation hardware. They're available in individual or complete front or rear kits.
Position: Front and rear
Front Sway Bar Type: Hollow
Rear Sway Bar Type: Hollow
Sway Bar Diameter (in): 1 1/4 in.
Mounting Hardware Included: Yes
Sway Bar Finish: Black powdercoated
Sway Bar Material: Steel
Quantity: Sold as a pair.
Notes: Front bar is 1.25 in. diameter, rear bar is 1.125 in. diameter.
Hurst Billet/Plus Shifter 05-09 Corvette, Z06
Our Price: $238.88

Manual Shifter, Billet/Plus, Chevy, Corvette, Each

Hurst shifters combine operation ease and strength. The Hurst Billet/Plus is the next generation of competition transmission controls. Designed with a high pivot mechanism for reduced shifter throw and a patented design for ease of operation, they feature an anodized gold base, polymide pivot cup for reduced vibration, high-strength steel stick, and a heat-treated billet steel gear selector for the ultimate in strength and reliability.

Installation Kit Required:     No
Knob Included:     No
Accommodates Stock Knob:     Yes
Shifter Boot Included:     No
Shifter Finish:     Black
Quantity:     Sold individually.
Notes:     Designed to accept factory shift knob. Shifter features adjustable gear stops.
K&N 63 Series Aircharger Intake Kits 05-07 Corvette
Our Price: $389.88

Air Intake, Black Tube, Red Filter, Chevy, Corvette, 6.0L, Kit

Serious air power.
These 63 Series Aircharger intake kits from K&N are built for many different vehicles. They virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. These intakes use only non-metallic, rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube. The aerodynamically engineered tube drives a massive amount of air into your engine, which translates into more power.
Tube Color: Black
Tube Material: Plastic
Filter Color: Red
Filter End Cap Finish: Carbon fiber
Sleeve Color: Black
Quantity: Sold individually.
MSD LS2/LS7 Multiple Spark Coils 05-07 Corvette
Our Price: $743.88

Ignition Coil, Blaster, Coil Pack, Square, Epoxy, Red, Chevy, 6,0L, Set of 8

High-performance, multi-spark replacement coils for GM Gen-III small block from MSD!
The complex electronic controls of the Gen-III engine management system presented MSD engineers with a substantial challenge, as the control drivers are built into the OE coils. MSD was able to design an advanced circuit that will operate with the factory electronics of the Gen-III engine controls, while producing a higher output spark. Not only do you get a higher voltage spark, but the MSD LS2/LS7 coils will also deliver multiple sparks! That's right--multiple spark discharge coils! These versions of the multiple spark coils are for GM's LS2 variant, and will provide significantly more spark than the stock components. These coils produce up to three times the spark energy of the stock coils, plus, they deliver multiple sparks to help keep the engine clean at an idle. These new kits provide everything you need to install the MSD multiple spark coils on your vehicle, including mounting hardware.
Coil Wire Attachment: Female/Socket
Coil Style: Coil pack
Primary Resistance: 0.570 ohms
Coil Internal Construction: Epoxy
Maximum Voltage: 44,000 V
Turns Ratio: 52:1
Secondary Resistance: 3.1K ohms
Inductance: 5.8 mH
Peak Current: 150 mA
Mounting Bracket Included: No
Coil Wire Included: No
Ballast Resistor Included: No
Coil Color: Red
Coil Shape: Square
Quantity: Sold as a set of 8.
BBK Power-Plus Series 80mm Throttle Body 97-04 Corvette 5.7L
Our Price: $379.88

Throttle Body, 80mm, Chevy, Corvette, 5.7L LS1, Each

   * Check to make sure this part fits your application

Bolt on extra horsepower in minutes.
BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages, so you know you're getting the best quality product and value possible.

Airflow Rate (cfm): cfm
Venturi Quantity: 1
Venturi Diameter (mm): 80mm
TPS Sensor Included: No
IAC Motor Included: No
Gaskets Included: Yes
Hardware Included: No
Injectors Included: No
Throttle Body Material: Cast aluminum
Throttle Body Finish: Natural