You are here: Home > Superchargers
Sort By:
Page of 2  
Vortech V-2 SQ SC-Trim High-Output Sytem - Polished 00-03 Honda S2000 2.0L
List Price: $6,258.95
Our Price: $5,715.88
You Save $543.07!

This system bolts on 49% horsepower to give your S2000 358 tire shreddin' horsepower. Torque improves from 153 lb./ft. to 214 lb./ft. on the 2.0L and from 162 lb./ft. to 219 lb./ft. on the 2.2L*

Quality Features:

   * Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
   * Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger text cell
   * Fuel management upgrade includes a high-flow fuel pump and fuel management unit (FMU)
   * Stand-alone ignition timing control computer provides for seamless acceleration
   * Integrated air/water, dual-pass charge cooler configuration allows for additional horsepower gains and features maintenance-free design
   * Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions
   * Retains the stock factory cooling components for OE integrity and the system fits under the stock hood
   * Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
   * Billet aluminum mounting bracket for "factory-type" appearance and rigidity
   * Maxflow Race bypass valve provides surge-free compressor operation
   * 50-state smog legal under CARB EO# D-213-21 (00-03) and D-213-24 (04-05)

Please Note:
*Supercharged horsepower and torque data shown is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements.

Warranty Information
The V-2 supercharger is covered by a three-year limited warranty on complete systems.

Stock HP/TQ: 240/153
Vortech HP/TQ: 358/214
Boost (PSIG) 7-8
Includes High-flow fuel pump, Fuel management unit (FMU) and Timing controller
CARB E.O. D-213-21
Weiand 6-71 Polished Supercharger Replacement Main Body
Our Price: $2,012.88

6-71 Supercharger Assembly, Main Body, Polished, Each

   * Check to make sure this part fits your application

Replacement parts for your supercharger.
These Weiand 6-71 replacement main bodies are designed to fit all of the parts originally equipped in your Weiand 6-71 superchargers. They are made of aluminum and feature a satin or polished finish. The main bodies include root screws with gears on the front of the body.
Supercharger Component Type: Main body
Supercharger Finish: Polished
Supercharger Style: 671
Quantity: Sold individually.
Weiand 6-71 Polished Street Supercharger Kit 392 Hemi
Our Price: $3,713.88

Supercharger System, 6-71 Series, Polished, .500 in. Pitch, Chrysler, 392 Hemi, Kit

45 to 55 percent extra horsepower.  Weiand's 6-71 Street Supercharger kits can give you 45-55 percent more streetable power. They feature double-pinned rotors (timed and clearanced after assembly), heavy duty front and rear bearing plates, and an intake manifold with a pop-off valve relocated to the back. The kits also come with a one-piece aluminum nose drive assembly, upper and lower drive pulleys, an idler pulley and bracket, a dual V-belt accessory drive pulley, a 3 in. Gilmer-style drive belt, and gaskets and hardware. Weiand also includes an adapter plate for two 4 barrel carburetors.

Engine Block Style: Stock/OEM standard deck
Pulley Style: Gilmer
Carburetor Quantity: Dual
Supercharger Finish: Polished
Computer Chip/Programmer Included: No
Fuel Pump Included: No
Regulator Included: No
Linkage Included: No
Intercooler Included: No
Teflon® Lined Rotors: No
Supercharger Style: 671
Quantity: Sold as a kit.
Notes: Kit features 1/2 in. drive pulley system.
Carburetor Mounting: 4-barrel square bore
Application Notes: Requires stock replacement harmonic damper, weiand aluminum water pump for 392 Hemi and BBC short style pulley for correct alignment.
Vortech Satin V-5 F-Trim Supercharger
Our Price: $1,919.88

V-5 F-Trim / Straight Discharge / Satin Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 475 horsepower
   * Maximum airflow: 700 CFM *
   * Maximum boost pressure: 20 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 72% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Polished V-5 F-Trim Supercharger
Our Price: $2,041.88

V-5 F-Trim / Straight Discharge / Polished Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 475 horsepower
   * Maximum airflow: 700 CFM *
   * Maximum boost pressure: 20 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 72% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Satin V-5 G-Trim Heavy Duty Supercharger
Our Price: $2,132.88

V-5 G-Trim / Straight Discharge / Heavy Duty / Satin Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 575 horsepower
   * Maximum airflow: 800 CFM *
   * Maximum boost pressure: 25 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 73% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Polished V-5 G-Trim Heavy Duty Supercharger
Our Price: $2,253.88

V-5 G-Trim / Straight Discharge / Heavy Duty / Satin Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 575 horsepower
   * Maximum airflow: 800 CFM *
   * Maximum boost pressure: 25 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 73% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Satin V-5 F-Trim CCW Supercharger
Our Price: $1,919.88

V-5 F-Trim / Straight Discharge / CCW / Satin Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 475 horsepower
   * Maximum airflow: 700 CFM *
   * Maximum boost pressure: 20 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 72% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Polished V-5 F-Trim CCW Supercharger
Our Price: $2,041.88

V-5 F-Trim / Straight Discharge / CCW / Polished Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 475 horsepower
   * Maximum airflow: 700 CFM *
   * Maximum boost pressure: 20 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 72% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Satin V-7 JT-Trim Supercharger
List Price: $3,021.95
Our Price: $2,760.88
You Save $261.07!

V-7 JT-Trim / Straight Discharge / Heavy Duty, CCW / Satin Finish
Vortech Polished V-7 JT-Trim Supercharger
List Price: $3,155.95
Our Price: $2,882.88
You Save $273.07!

V-7 JT-Trim / Straight Discharge / Heavy Duty, CCW / Polished Finish

(Satin finish shown.)
Vortech Satin V-4 J-Trim Supercharger
List Price: $2,900.95
Our Price: $2,649.88
You Save $251.07!

V-4 J-Trim / Straight Discharge / Heavy Duty / Satin Finish

The supercharger of choice for marine applications

   * Straight cut spur gear
   * Fits engines up to 1,100 horsepower
   * Maximum airflow: 1,600 CFM *
   * Maximum boost pressure: 29 PSI *
   * Absolute maximum impeller speed: 58,000 RPM
   * Adiabatic efficiency: 74% **
   * Available with straight discharge in clockwise rotation
   * Part numbers below do not include drive pulley
   * 11.186" Wide, 12.563" Tall, 6.315" Deep (not including input shaft)

The V-4 offers the best performance in our supercharger line and is designed with the serious racer in mind. When operating at 12 PSIG, this model is nearly twice as efficient as a Roots-type supercharger. The V-4 is capable of producing CFM flow levels in the 2,000 range, up to 32 PSIG of boost and horsepower potential up to 1,400. All units feature our exclusive D-port volute for improved efficiency and utilize extra wide, heavy duty design gears. The heavy duty (H/D) configuration includes high-speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive.
Vortech Polished V-4 J-Trim Supercharger
List Price: $3,036.95
Our Price: $2,773.88
You Save $263.07!

V-4 J-Trim / Straight Discharge / Heavy Duty / Polished Finish

The supercharger of choice for marine applications

   * Straight cut spur gear
   * Fits engines up to 1,100 horsepower
   * Maximum airflow: 1,600 CFM *
   * Maximum boost pressure: 29 PSI *
   * Absolute maximum impeller speed: 58,000 RPM
   * Adiabatic efficiency: 74% **
   * Available with straight discharge in clockwise rotation
   * Part numbers below do not include drive pulley
   * 11.186" Wide, 12.563" Tall, 6.315" Deep (not including input shaft)

The V-4 offers the best performance in our supercharger line and is designed with the serious racer in mind. When operating at 12 PSIG, this model is nearly twice as efficient as a Roots-type supercharger. The V-4 is capable of producing CFM flow levels in the 2,000 range, up to 32 PSIG of boost and horsepower potential up to 1,400. All units feature our exclusive D-port volute for improved efficiency and utilize extra wide, heavy duty design gears. The heavy duty (H/D) configuration includes high-speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive.
Vortech Satin V-5 G-Trim Supercharger
Our Price: $1,919.88

V-5 G-Trim / Straight Discharge / Satin Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 575 horsepower
   * Maximum airflow: 800 CFM *
   * Maximum boost pressure: 25 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 73% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)
Vortech Polished V-5 G-Trim Supercharger
Our Price: $2,041.88

V-5 G-Trim / Straight Discharge / Polished Finish

A compact supercharger ideal for sport compact applications

   * Straight cut spur gear
   * Fits engines up to 575 horsepower
   * Maximum airflow: 800 CFM *
   * Maximum boost pressure: 25 PSI *
   * Absolute maximum impeller speed: 65,000 RPM
   * Adiabatic efficiency: 73% **
   * Available with straight discharge and clockwise or counter clockwise rotation
   * Part numbers below do not include drive pulley
   * 8.93" Wide, 9.72" Tall (not including bracket), 5.82" Deep (not including input shaft)