BMC Performance - Muscle Car High Performance - Challenger, Charger, Magnum, 300, Mustang, GTO, Camaro, Corvette, Viper, Ford GT

You are here: Home > Universal Parts > Engine Components

Sort By:

Page of 2

MSD Distributor for Ford 351 TFI Ignition

Our Price: $276.88

MSD Distributor for Ford 351 TFI Ignition, Roller Cam with Steel Gear

Maximum Motorsports Standard Duty Oil Filter Relocation Kit 99-04 Mustang 2v 4.6L

Our Price: $198.88

Standard-duty version, fits 1999-2004 Modular Motor, except 2003-2004 Cobra

The Maximum Motorsports Oil Filter Relocation Kit moves the oil filter from the original location on the engine block, to inside the driver-side fender behind the bumper.

This is a top quality kit with beautiful billet aluminum mounts, high quality hose and AN fittings. Eliminates the hard to reach stock filter that drips on your steering rack and K-member during oil changes. The new filter location is easily accessible from the bottom of the car - in front of the fender liner and behind the front bumper. The filter is oriented vertically to eliminate oil drain-back, and the mess during filter changes. Converts from the small 4.6 modular filter to the commonly available large capacity 302 Ford filter. This kit is required when installing a Maximum Motorsports K-member on a modular engine car equipped with an OEM oil cooler (all 4.6 4V Cobra engines).

Complete kit includes a billet aluminum engine adapter, billet aluminum remote filter mount, -10 AN hose ends, hose, oil filter, all necessary mounting hardware, and detailed instructions. The standard version has high-pressure textile braided hose, aluminum push-lock -10 AN hose ends, and a FL-1A Ford oil filter. The severe-duty version uses Teflon-lined stainless-steel braided hose, aluminum swivel seal -10 AN hose ends, and a FL1-HP Ford Racing oil filter.

Maximum Motorsports Severe Duty Oil Filter Relocation Kit 99-04 Mustang 2v 4.6L

Our Price: $298.88

Severe-duty version, fits 1999-2004 Modular Motor, except 2003-2004 Cobra

The Maximum Motorsports Oil Filter Relocation Kit moves the oil filter from the original location on the engine block, to inside the driver-side fender behind the bumper.

This is a top quality kit with beautiful billet aluminum mounts, high quality hose and AN fittings. Eliminates the hard to reach stock filter that drips on your steering rack and K-member during oil changes. The new filter location is easily accessible from the bottom of the car - in front of the fender liner and behind the front bumper. The filter is oriented vertically to eliminate oil drain-back, and the mess during filter changes. Converts from the small 4.6 modular filter to the commonly available large capacity 302 Ford filter. This kit is required when installing a Maximum Motorsports K-member on a modular engine car equipped with an OEM oil cooler (all 4.6 4V Cobra engines).

Complete kit includes a billet aluminum engine adapter, billet aluminum remote filter mount, -10 AN hose ends, hose, oil filter, all necessary mounting hardware, and detailed instructions. The standard version has high-pressure textile braided hose, aluminum push-lock -10 AN hose ends, and a FL-1A Ford oil filter. The severe-duty version uses Teflon-lined stainless-steel braided hose, aluminum swivel seal -10 AN hose ends, and a FL1-HP Ford Racing oil filter.

Perma-Cool Oil Filter Relocation Kit

Our Price: $47.88

Oil Filter Quantity: 1
Oil Filter Included: No
Hoses Included: Yes
Hose Length (in): 96 in.
Fittings Included: Yes
Hardware Included: Yes
Diesel Compatible: No
Marine Use: No
Bracket Material: Aluminum
Bracket Finish: Polished
Quantity: Sold as a kit.
Notes: Brass fittings and stainless steel hose clamps included. Use Ford style oil filter with 3/4 inch 16 thread. The following adapters are included 3/4-16 in., 1in.-12, 13/16-16 in, 18mm x 1.5, 20mm x 1.5mm, 22mm x 1.5mm.

Oil Filter Relocation Kit, Single Filter, 96 in. Length Hoses, Kit

Fast and easy oil changes.
These single and dual remote oil filter relocation kits allow you to locate your oil filter where you want it for more convenient oil changes and increased engine oil capacity. These complete kits include everything you need for easy installation: A spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded, Ford-type spin-on oil filters (not included), and come with an assortment of adapters to attach the oil filter bracket to almost any engine.

Earl's Performance Temp-a-Cure Fluid Cooler

Our Price: $143.88

Fluid Cooler, Trans./Engine/Power Steering/Differential, Plate-Type, Aluminum, Natural, 5 in. x 13 in. x 2 in.

Superior design, materials, and construction.
Temp-A-Cure fluid coolers from Earl's Performance are among the most thermally efficient liquid-to-air heat exchangers available. Corrugated-screen internal Turbulator plates increase both thermal efficiency and mechanical strength. So you get the most efficient, smallest, and lightest practical package. Tow vehicles, motor homes, passenger cars, and even motorcycles can realize extended engine and/or transmission efficiency and life with these coolers. Temp-A-Cure fluid coolers are designed for the range of oil flows and air speeds encountered in high-performance automobiles. They're available in a range of widths, with a variety of inlet and outlet fittings, and every cooler is pressure checked to 175 psi.

Overall Height (in): 5.000 in.
Overall Width (in): 13.000 in.
Overall Thickness (in): 2.000 in.
Cooler Construction: Plate
Cooler Material: Aluminum
Inlet Size: -6 AN
Inlet Attachment: Male threads
Outlet Size: -6 AN
Outlet Attachment: Male threads
Number of Cooling Rows: 16
Core Height (in): 5.000 in.
Core Width (in): 9.000 in.
Core Thickness (in): 2.000 in.
Cooler Finish: Natural
Quantity: Sold individually.

Canton 3 Quart Accusump

Our Price: $214.88

The Canton 3 qt. Accusump is the standard, used in all types of racing and recreational vehicles, for over 25 years. These units are recommended for all size engines when oil pressure fluctuation problems are experienced or when pre-oiling is wanted.

This unit is 16" long 4.25" in diameter without valve or gauge.
With the gauge installed the length increases 2.5"
and the valve installed adds another 3.25".
Both the valve and gauge can be mounted away from the unit if necessary.

Does not including mounting brackets or manual or electric valve. All are available separately.

Canton Accusump Electric Valve Kit

Our Price: $174.88

Canton's E.P.C. valving has the convenience of an electric valve and the rapid refill rate of a manual valve. The E.P.C. valving allows the Accusump to quickly charge with oil when the engine's oil pressure is above a predetermined level and discharge when the engine's oil pressure drops below that level.

Comes with an electric valve, regulator, toggle switch, wire, terminals, and a pipe nipple.

Canton Accusump Mounting Bracket Kit

Our Price: $5.00

Mounting brackets are recommended for ease of installation for all our Accusumps. These clamps offer a convienent way to mount an Accusump to a panel or any other flat surface. By using the clamps you also reinforce the end caps for strength.

Mounting kits includes two stainless steel safety clamps with mounting brackets.

Moroso Universal Coolant Expansion Tank

Our Price: $116.88

* Designed for several applications where a small volume remote tank is necessary
* Fabricated Aluminum
* 1-1/4" Quart Capacity
* One �"NPT female fitting on bottom of tank and One 3/8"NPT female fitting on side of tank
* Integral Mounting Bracket
* Billet filler neck with barbed fitting for overflow hose

Moroso Racing Vacuum Pump Breather Tank

List Price: $91.02
Our Price: $76.88
You Save $14.14!

Overflow Tank, Vacuum Pump Breather, 1 qt., Round, Aluminum, Natural, Filtered Breather, Universal, Each

Overflow Tank Material: Aluminum
Overflow Tank Finish: Natural
Shape: Round
Capacity: 1 qt.
Length (in): 11.500 in.
Diameter (in): 3.125 in.
Vented: Yes
Recirculating: No
Drain Valve Included: Yes
Inlet Quantity: Single
Inlet Attachment: Male threads
Inlet Size: -12 AN
Overflow Tank Mounting: Bolt-in
Mounting Hardware Included: No
Quantity: Sold individually.

Trap oil, vent air. Moroso's racing vacuum pump breather tanks are a perfect companion to your Moroso racing vacuum pump. These all aluminum, lightweight tanks feature mounting straps for simplified installation, and include a non-hooded, clamp-on style filtered breather that traps oil while allowing oil to escape. These units also feature a hand-operated drain cock to facilitate tank cleaning.

Moroso 3qt. Engine Oil Accumulator

List Price: $238.22
Our Price: $189.88
You Save $48.34!

Oil Accumulator, 3 qt. Capacity, Aluminum, Natural, Each

Capacity: 3 quarts
Accumulator Material: Aluminum
Accumulator Finish: Natural
Accumulator Length (in): 20.13
Accumulator Diameter (in): 4.25
Oil Pressure Gauge Included: Yes
Shut Off Valve Included: Yes
Mounting Brackets Included: No
Quantity: Sold individually.

It could save your engine. These Moroso engine oil accumulators just might save your engine from damage, by giving you extra oil in reserve. Plumbed into the pressurized side of your oiling system, they use compressed air to force its oil reserve into your engine when the oil pressure drops below normal. When the pressure returns to normal, that reserve oil is forced back into the accumulators, and is ready for the next emergency.

Moroso 1.5qt. Engine Oil Accumulator

List Price: $231.82
Our Price: $189.88
You Save $41.94!

Oil Accumulator, 1 1/2 qt. Capacity, Aluminum, Natural, Each

Capacity: 1.5 qt.
Accumulator Material: Aluminum
Accumulator Finish: Natural
Accumulator Length (in): 10.25
Accumulator Diameter (in): 4.25
Oil Pressure Gauge Included: Yes
Shut Off Valve Included: Yes
Mounting Brackets Included: No
Quantity: Sold individually.

It could save your engine. These Moroso engine oil accumulators just might save your engine from damage, by giving you extra oil in reserve. Plumbed into the pressurized side of your oiling system, they use compressed air to force its oil reserve into your engine when the oil pressure drops below normal. When the pressure returns to normal, that reserve oil is forced back into the accumulators, and is ready for the next emergency.

BBK Power-Plus Series Universal 4 Barrel Throttle Body

Our Price: $379.88

Throttle Body, 4-Barrel, 1,000 cfm, Universal, Each

* Check to make sure this part fits your application

Bolt on extra horsepower in minutes.
BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages, so you know you're getting the best quality product and value possible.
Throttle Body Style: Multi-port injection, MPI
Airflow Rate (cfm): 1,000 cfm
Venturi Quantity: 4
Venturi Diameter (mm): 44.45mm
TPS Sensor Included: Yes
IAC Motor Included: No
Gaskets Included: Yes
Hardware Included: No
Injectors Included: No
Throttle Body Material: Cast aluminum
Throttle Body Finish: Natural
Quantity: Sold individually.

B&M SuperCooler Oil Cooler

Our Price: $75.88

Fluid Cooler, Engine/Transmission, Plate-Type, Aluminum, Black, 10 in. x 11 in. x 1 1/2 in., Each
Helping your transmission and engine keep their cool.
The last thing you need in the middle of a race or a road trip is to have a transmission or engine go south because your oil cooler can't keep up. B&M's SuperCooler oil coolers will keep your transmission or engine cool and running in your time of need. They're made of lightweight aluminum, with an efficient "stacked plate" design. Multiple cooling paths give them the cooling capacity of larger fan-and-tube coolers. And, because they have a low pressure-drop design, there is less oiling-system restriction.
Part Number: BMM-70266
Overall Height (in): 10.000 in.
Overall Width (in): 11.000 in.
Overall Thickness (in): 1.500 in.
Cooler Construction: Plate
Cooler Material: Aluminum
Inlet Size: 1/2 in. NPT
Inlet Attachment: Female threads
Outlet Size: 1/2 in. NPT
Outlet Attachment: Female threads
Number of Cooling Rows: 36
Core Height (in): 8.000 in.
Core Width (in): 11.000 in.
Core Thickness (in): 1.500 in.
Cooler Finish: Black painted
Quantity: Sold individually.
Notes: This racing model doesn't include installation components.

B&M SuperCooler Oil Cooler

Our Price: $96.88

Fluid Cooler, Engine/Transmission, Plate-Type, Aluminum, Black, 11 in. x 11 in. x 1 1/2 in., Each
Helping your transmission and engine keep their cool.
The last thing you need in the middle of a race or a road trip is to have a transmission or engine go south because your oil cooler can't keep up. B&M's SuperCooler oil coolers will keep your transmission or engine cool and running in your time of need. They're made of lightweight aluminum, with an efficient "stacked plate" design. Multiple cooling paths give them the cooling capacity of larger fan-and-tube coolers. And, because they have a low pressure-drop design, there is less oiling-system restriction.
Overall Height (in): 11.000 in.
Overall Width (in): 11.000 in.
Overall Thickness (in): 1.500 in.
Cooler Construction: Plate
Cooler Material: Aluminum
Inlet Size: 1/2 in. NPT
Inlet Attachment: Female threads
Outlet Size: 1/2 in. NPT
Outlet Attachment: Female threads
Number of Cooling Rows: 48
Core Height (in): 9.000 in.
Core Width (in): 11.000 in.
Core Thickness (in): 1.500 in.
Cooler Finish: Black painted
Quantity: Sold individually.
Notes: This racing model doesn't include installation components.